Advertisement
Quick Links
Advertisement
Related Manuals for Adexa HRQ-911
Summary of Contents for Adexa HRQ-911
- Page 1 Instruction Manual Gas Solid Top with Gas Oven operating instruction (Read the machine before use)
- Page 2 Instruction Manual In order to give full play to the performance of this product and reduce unnecessary losses and damage, please read the product manual carefully before use, and keep it properly for future reference. This product is characterized by high technical content, novel design, complete functions, convenient operation, energy saving and environmental protection, etc., which is a more advanced gas combined furnace in China.
- Page 3 2. Installation instructions 2.1General parameters 2.1.1 Technical parameters Name Gas Solid Top with Gas Ovene Model HRQ-911 HRQ-711 size 800×900×920 700×700×920 Intratracheal size G 3/4〃 Gas flow rate (m3/h) (Based on the...
- Page 4 Instruction Manual 2.1.2 attached list Gas fuel classification The basic characteristics of fuel gas are divided into four categories by the fuel gas acquisition method 1.Natural gas (pipeline gas) 2000Pa （1）gas well gas （2）associated(-dissolved) gas （3）mine drainage gas 2.Artificial gas (pipeline gas) 1000~1200Pa （1）gas well gas （2）associated(-dissolved) gas （3）mine drainage gas...
- Page 5 Instruction Manual 2.1.4 Schematic diagram of the structure...
- Page 6 Instruction Manual 3. Installation requirements and matters needing attention ※All installations and operations must be carried out by qualified persons as required. 3.1 Installation requirements ※Because the machine is heavy, please consider the weight of the machine when installing. We recommend that you install it on the ground. ※When installation: the machine must be 10cm away from the wall, in case the machine needs to be installed against the wall, the wall must be fire resistant, can not burn, the left and right side of the...
- Page 7 Instruction Manual the exhaust fan should be installed to ensure that the steam and the combustion exhaust gas are discharged during the work process. ※After the installation of the machine, must keep stable, horizontal placement can not be tilted, also can not be shaken when used. ※Use the gas with the permission of the gas supplier first, and verify that the supplied gas is consistent with the gas used in the future.
- Page 8 Instruction Manual connected with the ground wire conforming to the safety regulations. ※After the installation, check whether the wiring is loose, whether the air pressure is normal, and whether the safe connection is reliable. ※The temperature adjustment range of the equipment baking furnace is between 50 and 330℃, and the recommended normal use temperature is between 180 and 250℃.
- Page 9 Instruction Manual In the process of work and before and after, due to the high temperature relationship, do not directly contact the box with your hands, especially in the high temperature area. Do not use the power supply (gas) other than the product label power supply. Do not use the power supply knife that does not meet the safety standards and quickly cut off the gas source valve.
- Page 10 Instruction Manual ※Do not use corrosive substances (e. g. potassium chloride) to clean the ground under the equipment. ※To clean the dirt on the burner and baffle in the furnace regularly (recommended once a week) ※ Do not change the ventilation space required for burning the equipment.
- Page 11 Instruction Manual counterclockwise to the maximum flame position, "00" is the maximum flame, to ignite the main burner, it can be used.(To set the flame to the minimum, rotate counterclockwise to the minimum flame position, and "0" is the minimum flame. ※After use, close the main burner: rotate the knob from the maximum flame or minimum flame position to the "★"...
- Page 12 Instruction Manual 4.2. Lower gas baking oven: ※position and press the knob to the bottom while constantly pressing the electronic burner to ignite the fire burner (fire). Press the knob down for 20 seconds; when releasing the knob, the low fire burner (flame) must be lit;...
- Page 13 Instruction Manual ※The first use of the need to release the internal air, the release time may be longer, about three to five minutes. ※ Passing method: Turn the knob from the off state, press counterclockwise to the "★" position, and press the knob down for about three to five minutes.