Shelly PLUS I4 General User And Safety Manual

EN
USER AND SAFETY GUIDE
4 DIGITAL INPUTS CONTROLLER
SHELLY PLUS I4
Read before use
This document contains important technical and safety
information about the device, its safe use and installation.
Before beginning the installation, please read
⚠CAUTION!
carefully and entirely this guide and any other documents
accompanying the device. Failure to follow the installation
procedures could lead to malfunction, danger to your health
and life, violation of law or refusal of legal and/or commercial
guarantee (if any). Shelly Europe Ltd. is not responsible for
any loss or damage in case of incorrect installation or improp-
er operation of this device due to failure of following the user
and safety instructions in this guide.
Front View
Serial
interface
High voltage. Do not connect to the serial inter-
⚠CAUTION!
face, when Shelly Plus i4 is power supplied.
Product Introduction
Shelly® is a line of innovative microprocessor-managed
devices, which allow remote control of electric circuits
through a mobile phone, tablet, PC, or home automation sys-
tem. Shelly® devices can work standalone in a local Wi-Fi
network or they can also be operated through cloud home
automation services. Shelly Cloud is a service that can be
accessed using either an Android or iOS mobile application
or with any internet browser at https://control.shelly.cloud/.
Shelly® devices can be accessed, controlled, and monitored
remotely from any place where the user has internet connec-
tivity, as long as the devices are connected to a Wi-Fi router
and the Internet. Shelly® devices have an Embedded Web
Interface accessible at http://192.168.33.1
directly to the device access point, or at the device IP ad-
dress on the local Wi-Fi network. The embedded Web Inter-
face can be used to monitor and control the device, as well
as adjust its settings.
Shelly® devices can communicate directly with other
Wi-Fi devices through HTTP protocol. An API is provided
by Shelly Europe Ltd. For more information, please visit:
https://shelly-api-docs.shelly.cloud/#shelly-family-overview.
Shelly® devices are delivered with factory-installed firm-
ware. If firmware updates are necessary to keep the devices
in conformity, including security updates, Shelly Europe Ltd.
will provide the updates free of charge through the device
Embedded Web Interface or the Shelly mobile application,
where the information about the current firmware version
is available. The choice to install or not the device firmware
updates is the user's sole responsibility. Shelly Europe Ltd.
shall not be liable for any lack of conformity of the device
caused by failure of the user to install the provided updates
in a timely manner.
Schematics
fig. 1
Legend
• N: Neutral terminal / wire
• L: Live (110-240 VAC) terminal / wire
• SW1, SW2, SW3, SW4: Switch terminals
Installation Instructions
Shelly Plus i4 (the Device) is a Wi-Fi switch input designed to
control other devices over the Internet. It can be retrofitted
into a standard in-wall console, behind light switches or other
places with limited space.
Danger of electrocution. Mounting/installation
⚠CAUTION!
of the Device to the power grid has to be performed with cau-
tion, by a qualified electrician.
Danger of electrocution. Every change in the
⚠CAUTION!
connections has to be done after ensuring there is no voltage
present at the Device terminals.
Use the Device only with a power grid and ap-
⚠CAUTION!
pliances that comply with all applicable regulations. A short
circuit in the power grid or any appliance connected to the
Device may damage it.
Connect the Device only in the way shown in
⚠CAUTION!
these instructions. Any other method could cause damage
and/or injury.
⚠CAUTION!
⚠RECOMMENDATION:
gle-core cables or stranded cables with ferrules.
Before starting the mounting/installation of the Device,
check that the breakers are turned off and there is no voltage
on their terminals. This can be done with a phase tester or
multimeter. When you are sure that there is no voltage, you
can proceed to connecting the cables.
Connect a switch or a button to a SW terminal of the Device
and the Live wire as shown on fig. 1.
Connect the Live wire to an L terminal and the Neutral wire to
the N terminal of the Device.
Rear View
Reset
button
⚠CAUTION!
Troubleshooting
In case you encounter problems with the installation or op-
eration of Shelly Plus i4, please check its knowledge base
page:
https://kb.shelly.cloud/knowledge-base/shelly-plus-i4
Initial Inclusion
If you choose to use the Device with the Shelly Smart Control
mobile application and cloud service, instructions on how to
connect the Device to the Cloud and control it through the
Shelly Smart Control app can be found in the mobile appli-
cation guide.
when connected
The Shelly mobile application and Shelly Cloud service are
not conditions for the Device to function properly. This De-
vice can be used standalone or with various other home au-
tomation platforms and protocols.
⚠CAUTION!
switches connected to the Device. Keep the devices for re-
mote control of Shelly (mobile phones, tablets, PCs) away
from children.
Specifications
• Purpose of control: Operating
• Construction of control: Independently mounted
• Mounting: Flush mounting
• Dimensions (HxWxD): 37x42x16 mm / 1.46x1.65x0.63 in
• Screw terminals max torque: 0.25 Nm / 2.2 lbin
• Conductor cross section: 1.0 to 2.5 mm² / 16 to 14 AWG
• Conductor stripped length: 5 to 6 mm / 0.20 to 0.24 in
• Ambient temperature: -20 °C to 40 °C / -5 °F to 105 °F
• Humidity 30 % to 70 % RH
• Pollution Degree 2
• Max. altitude 2000 m / 6562 ft
• Power supply: 110-240 VAC, 50/60Hz
• Electrical consumption: < 1 W
• Overvoltage category: III
• Impulse voltage: 4000 V
• Multi-click support: Up to 12 possible actions (3 per but-
ton)
• RF band: 2400 - 2495 MHz
• Max. RF power: < 20 dBm
• Wi-Fi protocol: 802.11 b/g/n
• Wi-Fi operational range (depending on local conditions):
- up to 50 m / 160 ft outdoors
- up to 30 m / 100 ft indoors"
• Bluetooth protocol: 4.2
• Bluetooth operational range (depending on local condi-
tions):
- up to 30 m / 100 ft outdoors
- up to 10 m / 33 ft indoors
• CPU: ESP32
• Flash: 4 MB
• Webhooks (URL actions): 20 with 5 URLs per hook
• Scripting: mJS
• MQTT: Yes
Declaration of conformity
Hereby, Shelly Europe Ltd. (former Allterco Robotics EOOD)
declares that the radio equipment type Shelly Plus i4 in com-
pliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/
EU, 2011/65/EU. The full text of the EU declaration of confor-
mity is available at the following internet address:
https://shelly.link/Plus-i4_DoC
Disposal & Recycling
This refers to the waste of electrical and electronic equip-
ment. It is applicable in the US and other countries to collect
waste separately.
This symbol on the product or in the accompanying
literature indicates that the product should not be dis-
posed of in the daily waste. Shelly Plus i4 must be recy-
cled to avoid possible damage to the environment or human
health from uncontrolled waste disposal and to promote the
reuse of materials and resources. It is your responsibility to
Do not install the Device where it can get wet.
Connect the Device using solid sin-
Do not insert multiple wires in a single terminal.
Do not allow children to play with the buttons/
dispose of the device separately from general household
waste when it is already unusable.
FCC Notes
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation. The manufacturer is not
responsible for any radio or TV interference caused by un-
authorized modification or change to this equipment. Such
modifications or change could void the user's authority to
operate the equipment. This equipment has been tested
and found to comply with the limits for a Class B digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not oc-
cur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
RF exposure statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. The device has
been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition with-
out restriction.
Manufacturer: Shelly Europe Ltd. (former Allterco Robotics
EOOD)
Address: 103 Cherni vrah Blvd., 1407 Sofia, Bulgaria
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud
Official website: https://www.shelly.com
Changes in the contact information data are published by the
Manufacturer on the official website.
All rights to the trademark Shelly® and other intellectual rights
associated with this Device belong to Shelly Europe Ltd.
E504925
OPEN ENERGY
MANAGEMENT EQUIPMENT