Advertisement
S-1230 Print
Data lines to print A-1230
Potentiometer for adjusting
buttonhole sensor A
Potentiometer for adjusting
buttonhole sensor B
Foot control
2-pole black
Control signals from/to L-print
4-pole green
Buttonhole sensors
Reverse switch 6-pole black
L-
Stitch length sensor, 3-pole red
Stitch width sensor, 3-pole black
Position indicator
5-pole black
Power supply from L-print
5-pole red
Magnet basting device, 2-pole green
Service switch
Pos. Service
I
Pos. Normal
Bobbin winder motor
4-pole blue
Stitch length step motor
4-pole red
Stitch width step motor
4-pole black
Warning!
If print S-1230 has to be replaced, then buttonhole adjustment and
forward/reverse feed equalization must be carried out.
10
1230
Advertisement
