Yamaha M-2 Owner's Manual page 7

| AC CONNECTIC
8 5 = S 0 t 7] 6 H
1. To connect the speaker cords to the speaker
terminals, loosen the terminal knob by turning
it to the left (anti-clockwise)
so that you can
see the hole into which the cord will inserted.
SPEAKER CORD
ho
OPERATIONS
2. Insert the stripped speaker cord into the hole,
turn the terminal knob to the right (clockwise)
and tighten it fast.
plifier is connected to this terminal.
connect to the DC INPUT terminals.
‫כ‬ 8
€ Level controls are provided on the rear panel
to adjust the M-2 for use with any control
amplifier.
The right hand knob is for the left channel and
the left hand one for the right channel.
If the sound is distorted by using a contro!
amplifier with a high output, lower the input
sensitivity by turning these knobs counter-
clockwise.
Control Amplifier
8 0 6 6 ‫ם‬
Lch LEVEL
Control
Rch LEVEL
Control
Speaker | (|
Systems
When listening at low volumes