Huawei HG659 Self-Installation Manual

4-port

Hide thumbs Also See for HG659:

Huawei HG659 4-port self-installation guide

Vodacom as an Internet Service Provider (ISP) has partnered with multiple partner network

service providers countrywide to provide you with fibre and fixed voice services. Your

services are provided by one of our partners and your installation process will be as

indicated below.

Please note: Your Vodacom router will be sent to you via RAM couriers.

Step-by-step fibre network installation guide

1. Our network partner will perform the physical installation of the fibre to your home

(this may include trenching into your home).

2. Our partner will install a fibre box in your home which will enable you to connect

your Vodacom router in order to activate your services. The fibre box that will be

installed will vary by network partner (colour, labelling and design)

3. After the installation by the network partner, please ensure that you switch on the

fibre box. See example below:

Power button

The Vodacom router will already have your settings configured. The following steps needs

to be followed before your internet service can be activated.

Unpack the Vodacom router, and check if all the cables and power supply are inside the box.

What's included in the box:

 1x Huawei HG659

 1x Power supply

 1x LAN/Ethernet cable

 2x Grey telephone cables

 1x Splitter

 Quick Start Guide.

Table of Contents

Do you have a question about the HG659 and is the answer not in the manual?

Page 1 Huawei HG659 4-port self-installation guide Vodacom as an Internet Service Provider (ISP) has partnered with multiple partner network service providers countrywide to provide you with fibre and fixed voice services. Your services are provided by one of our partners and your installation process will be as indicated below.
Page 2 Step 2 Before switching on your router, please connect the cables as shown below: 1. Connect the black power cable to the power port at the back of your router 2. Connect the yellow Ethernet cable to the blue WAN port at the back your router 3.
Page 3 4. Switch on your router by pressing the Power button 5. After switching on the router, please wait for at least 10 minutes for the router to complete the automated service configuration. Once the automated configuration completes, the router may restart. Please do not unplug the devices during this time.
Page 4 6. The Power, WAN and Internet LED lights should all be stable to indicate that the connection is now established and the internet is active POWER INTERNET Contact Vodacom Fibre Customer Care on 082 1904, FREE from a Vodacom number, should you need any help with the setup procedure.