Page 1
Forte Forte " Forte Forte " Power amplifier User manual Updated 24-04-2017 Made by ALL Engineering...
Page 2
Our Forte power amplifier was designed for use in conjunction with our digital preamp Adagio. However based on normal standards as used in hifi the Forte can be used with almost any analog or digital pre amplifier. Both RCA or XLR inputs are selectable on the back side of the unit.
Page 3
Forte and Adagio together Made by ALL Engineering...
10. The Forte must be placed on a firm, level surface where it is not exposed to dripping or splashing.
Page 5
What is in the Box The Forte amplifier • Power cord (only Euro or USA based power cords) • Remote cable • USB stick ( user manual) • Made by ALL Engineering...
Page 6
• area. On the back side the product is marked for the specific mains voltage. RCA inputs: Use single ended cables to connect the Forte to your single ended pre amplifier. • Select the input switches to “RCA input” setting for both channels.
Page 7
Remote switch: Depending the type of pre amplifier it is possible to switch the Forte “On” or • “Off”. In conjunction with the “Adagio ” pre amplifier a dedicated cable is supplied to connect both products together. For connection a 3 pole XLR mini connector can be used and depending the way your pre amplifier should be connected, it can be wired accordingly.
Page 8
Loudspeaker terminals: Loudspeakers can be used having an nominal impedance between 4 • and 8 Ohms. Mains supply: First check the marks on the backside of the "Forte" to be sure it matches the • power requirements for the specific country.
Error indication and protection: In normal conditions the error led will be switched off all the • time. However If one of the channels has a malfunction, the control circuit will immediately remove the mains power from the power circuits but also disconnect the loudspeaker from both amplifiers.
Need help?
Do you have a question about the Forte and is the answer not in the manual?
Questions and answers