Pioneer F-91 Operating Instructions Manual page 8

LISTINING TO BROADCASTS
Receiving Preset Stations
e The procedure above permits an easy and precise radio
reception.
e Broadcast stations must be preset first following the
instructions under ''Presetting FM and AM Stations"'
1. Press the POWER switch @ on.
2. Select channels 1-12 or 13-24 with the station call
selector switch @.
3. Press the STATION CALL switch @ corresponding
to the desired station.
Last Station Memory
e When turning the POWER switch on, the last station received
before turning power off is tuned in.
e When the BAND selector switch is pressed with the power
on, the station received with the last band change will be
tuned in.
e While the PROGRAM MEMORY ON/OFF switch is on,
stations stored in the program memory are received.
USING THE PROGRAM MODE MEMORY
The three stations stored in the program mode memory
are recalled in sequence as power is turned repeatedly
off and on again. Any desired frequency can be
memorized.
Example:
This function can be used for absent recording of three different
stations with an audio timer.
A Station 0.0.0.0... 9:00 — 10:00 (PROGRAM | )
B Station ........... 10:30 — 11:30 (PROGRAM II)
C Station ........... 13:00 — 15:00 (PROGRAM III)
1. Storing stations in the program mode
memory.
Procedure Tuner Operation
(1) Press the ON/OFF button to turn the
PROGRAM indicator on.
ON/OFF SET CHECK
Oo ie) 1?)
t
(2) Press the SET button. PROGRAM || Memory standby.
ON/OFF SET CHECK
eo) (e) [e) SET _
t 1 Cursor
(3) Press the STATION CALL switch PROGRAM
corresponding to the station you want
to store in PROGRAM | SETI __
(for example, channel 6).
6/18
(4) Press the STATION CALL switch cor- |{ PROGRAM_ || Storage in
responding to the station you want to PROGRAM II
SETI i
store in PROGRAM II completed.
(for example, channel 8)
8/20
(5) Press the STATION CALL switch PROGRAM || When storage in
corresponding to the station you want PROGRAM il is
to store in PROGRAM ill du ll completed, '__
(for example, channel 24). moves to 'I',
indicating that the
* 13-24 |4| 12/24
station in PRO-
GRAM | will be
Press the station call selector recalled when
first. turning power off
and on again.
Display
PROGRAM
The program
mode is enterd.
Storage in
PROGRAM |
completed.
¢ If youpress the SET switch again, the contents of program
memories |, Il and {ll will be erased.
8
<ARE1054>
2. Activating the program memory
Procedure Display
(1) Press the ON/OFF button to turn
the PROGRAM indicator on.
ON/OFF SET CHECK lee
@) ©) Oo ae
*
Tuner Operation
Starts program
memory operation.
—
When power is turned ON by an The station stored
PROGRAM Jl in PROGRAM '1'
audio timer, etc...
rat ll (channel 6) is
— received and '__'
moves to 'Il',
indicating that Il
will be recalled
when power is
turned off and on
again.
After this, stations will be recalled in the following sequence each
time power is turned off and then on: Il (CH8) > Ill (CH24) >
| > tl > Ill, ete.
e When power is turned on with the 'PROGRAM' indication
off (program mode memory not operating), the last station
received before turning power off will be received.