Sony BDP-S380 Operating Instructions Manual page 7

12
eee
Step 2: Easy Setup
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
1 insert two Size AA (R6) batteries by
matching the ®© and © ends on the
batteries to the markings inside the
battery compartment.
=> to AC outlet
3 Press 1/Ù to turn on the player.
4 Turn on the TV, then switch the input
selector on your TV so that the signal
from the player appears on your TV
screen.
5 Perform [Easy Setup].
Follow the on-screen instructions to
make the basic settings using 4;
=> and ENTER on the remote.
Connecting to the
Network
Use a LAN cable to connect to the LAN (100)
terminal on the player.
LAN cable
(not supplied)
Broadband ADSL modem/
router Cable modem
Intemet
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
To set the network settings
Select [Network Settings], [Internet Settings],
then [Wired Setup] (page 20), and follow the
'on-screen instructions to complete the setup.
Turn off the player, then connect the USB
Wireless LAN Adapter (UWA-BR100 only
available as of October 2010) to the USB jack
on the front or rear of the player.
o
'The USB Wireless LAN Adapter may not be
available in some regions/eountries.
USB Wireless
LAN Adapter
LAN cable G
À) (not supplied)
ae e)
Wireless LAN ADSL modem/ Internet
router Cable modem
To set the network settings
Select [Network Settings], [Internet
Settings], then [USB Wireless Setup]
(page 20), and follow the on-screen
instructions to complete the setup.
Playback
Playing a Disc
For playable discs, see "Playable discs"
(page 24).
1 'Switch the input selector on your TV so
that the signal from the player
appears on your TV screen.
2 Press & OPEN/CLOSE, and place a
disc on the disc tray.
Playing side facing down
3 Press & OPEN/CLOSE to close the
disc tray.
Playback starts.
If playback does not start automatically,
select @ in the $} [Video], JJ [Music],
or (@ [Photo] category, and press
ENTER.
Some BD-ROMs with the "BD-LIVE" logo*
have bonus content and other data that can be
downloaded for enjoyment.
«®ve.
1 Connect a USB memory to the USB
jack on the rear of the player (page 7).
As your local storage, use a 1 GB or
larger USB memory.
2 Prepare for BD-LIVE (BD-LIVE only).
+ Connect the player to a network
(page 12).
* Set [BD Internet Connection] to
[Allow] (page 18).
3 Insert a BD-ROM with BONUSVIEW/
BD-LIVE.
'The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
To delete data in the USB memory, select [Erase BD
Data] in the {7H [Video], and press ENTER. All data
stored in the buda folder will be erased.
You can check the playback information,
etc., by pressing DISPLAY.
'The displayed information differs depending
on the disc type and player status.
Example: when playing a BD-ROM
[T] Output resolution/Video frequency
[2]; Title number or name
3] The currently selected audio setting
4] Available functions (9, angle,
OD audio, EJ subtitle)
5] Playback information
Displays the Play mode, Playing s t a
bar, Disc type, Video codec, Bitrate,
Repeat type, Elapsed time, and Total
playing time.
6] Chapter number
7] The currently selected angle
yaegh |]
13