Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Camina & Schmid Lina 4545 s
Summary of Contents for Camina & Schmid Lina 4545 s
- Page 1 OPERATING INSTRUCTIONS Fireplace insert LINA 45-120 LINA TV 45-120...
- Page 2 Lina models Lina 4545 h Lina 4545 s Lina 4551 h Lina 4551 s Lina 4557 h Lina 4557 s Lina 4580 h Lina GT 4545 s Lina GT 4545 h Lina GT 4551 s Lina GT 4551 h Lina GT 4557 s...
- Page 3 Lina 7345 h Lina 7351 h Lina 7357 h Lina 7351 h Kristall+ Lina 7363 h Lina 7363 h Kristall+ Lina 8745 h Lina 8751 h Lina 8757 h Lina GT 7363 h Kristall+ Lina 8770 h Lina 10045 h Lina 8751 h Kristall+ Lina 10051 h Lina 8757 h Kristall+...
- Page 4 Lina TV 6745 h/s Lina TV 6745 s/s Lina TV 6751 h/s Lina TV 6751 s/s Lina TV 6757 h/s Lina TV 6757 s/s Lina TV 6780 h/s Lina TV 7345 s/s Lina TV 7345 h/s Lina TV 7351 s/s Lina TV 7351 h/s Lina TV 7357 s/s Lina TV 7357 h/s...
-
Page 5: Table Of Contents
Table of Contents 1. Safety 3.3.4 Correct drying and storage About these instructions 3.3.5 Drying time Warnings Wood briquettes 1.2.1 Symbols 4. Prior to operation 1.2.2 Personal injury 1.2.3 Material damage Transport Safety instructions 4.1.1 Delivery Important information 4.1.2 Storage Target groups Installation and handover 1.5.1... -
Page 6: Safety
Safety Safety About these instructions 7.1.5 Rear tilting door in cleaning position, Lina TV Kristall+ model These are original installation instructions in English. Useful hints in the event of faults Fireplace inserts have been designed in line with the state of the art and recognised safety regulations. These 8. -
Page 7: Personal Injury
Safety Target groups 1.2.2 Personal injury 1.5.1 Operator Warning notes signalled by the “CAUTION” symbol provide information about possible residual hazards to people that The operator is the owner and user of the heating technology can arise when working with this appliance. Signal words or the person to whom the technical operation of this also highlight the nature and severity of the hazard. -
Page 8: Ce Marking And Serial Plate
Safety CE marking and serial plate Fireplace inserts conform to European directives and supplementary national requirements. The CE marking on the serial plate of the appliance indicates that the manufacturer Camina & Schmid Feuerdesign und Technik GmbH & Co. KG, confirms that the product conforms to its declared performance. -
Page 9: Correct And Proper Use
Safety Correct and proper use 1.8.6 Cleaning, maintenance and troubleshooting 1.8.1 Fireplace inserts Comply with cleaning and maintenance intervals and The fireplace inserts are part-time operation fireplaces in immediately rectify faults. These measures are part of compliance with EN 13229. They may only be operated correct and proper use! as individual room heaters (stoves). - Page 10 Safety CAUTION WARNING Risk of explosion! Hazardous gases! High temperatures are produced in front of the fireplace, Fireplace inserts are room air-dependent fireplaces. When which could heat up explosive materials! simultaneously operating appliances, such as air extraction Never lay and/or store explosive materials close to the systems (e.g.
-
Page 11: Behaviour In The Event Of An Emergency
Safety 1.10 Behaviour in the event of an 1.11 Fire protection emergency Comply with all state building regulations, fire regulations, 1.10.1 In the event of a fire administrative and insurance-related regulations applicable at the installation site. National and local regulations need Correct behaviour in the event of a fire: to be complied with. -
Page 12: Parts Made Of Combustible Materials
Safety 1.11.2 Parts made of combustible materials 1.11.2.2 Outside the radiation range 1.11.2.1 Within the radiation range Ensure the following safety distances with regard to parts made of combustible materials or combustible parts, Adhere to the following safety distances with regard to including fitted furniture: parts made of combustible materials or combustible parts, There needs to be a minimum distance of 50 mm from the... -
Page 13: Product Information
Product information Product information Installation of Lina/Lina TV hinged Installation of Lina/Lina TV door guillotine door Fig. 6: Showing Lina 6751 s Fig. 8: Showing Lina 6751 h Fig. 7: Showing Lina TV 6751 s/s Fig. 9: Showing Lina TV 6751 h/s Components: Components: A = Cast-iron dome... -
Page 14: Weight And Dimensions
Fuels Weight and dimensions Heating technology and environment The weight and dimensions of the product vary depending Wood is an energy source that is constantly regenerated and on the type and model. The serial plate includes important is CO2-neutral in terms of the environment and in the natural information –... -
Page 15: Permitted Fuels
Fuels Logs Their combustion residue will produce uncontrolled air pollution but will also have an adverse impact on the 3.3.1 Recommended residual moisture level functionality and service life of the chimney and fireplace insert. The consequences are a higher susceptibility to As a manufacturer with over 20 years of experience with failure and faster wear. -
Page 16: Calorific Value Of The Wood
Prior to operation 3.3.3 Calorific value of the wood 3.3.5 Drying time Use the diagram to determine the calorific value in kWh/ A minimum of one year is a guideline time for drying kg (based on 15 % residual moisture content) of the most softwood (e.g. -
Page 17: Installation And Handover
Operation Installation and handover The technician needs to hand over to the operator all the technical documents on the appliance and all accessory SAFETY INSTRUCTION parts for the safe operation of the fireplace. Following initial Only permit a technician to install your fireplace! start-up, the technician has an obligation to instruct the The fireplace must be installed by a technician. -
Page 18: Information On Heating Operation
Operation Controls Inadequate supply of air and/or discharge of heating gas can lead to hazardous exhaust gas escape at the location of 5.2.1 Door controls, guillotine door the fireplace. Do not modify the combustion air supply and keep all combustion air openings of the fireplace open during operation! Keep the lockable ventilation grilles open during operation and during the cooling-down phase! Fig. -
Page 19: Combustion Air" Lever
Operation Loading The Kristall+ models feature a removable door handle on the guillotine door. 5.3.1 Preparation for the addition of fuel Remove the combustion residue from the last heating processes when cooled down. It is not necessary to remove the ash as an ash bed promotes the combustion cycle. -
Page 20: Lighting The Fire
Operation Lighting the fire Refer to chapter 12 “Technical data“ for the recommended loading capacity. DANGER Danger of fire by an ignition flame or deflagration! Phases of the heating process Do not use liquid fuels or other hazardous liquid to light The heating process is divided into three combustion stages: the fire or pour it onto the flames! Use paraffin kindling or other ignition aids, such as... -
Page 21: Combustion Stage 2: Power Phase
Operation 5.5.2 Combustion stage 2: Power phase “Combustion air” lever – Position 3: The air supply can be throttled when the combustion cycle View “from above” is finished and no more flames are visible. The rapid cooling down of the fireplace and the living space by the flue liner is prevented in this position of the combustion lever. -
Page 22: Faults
Faults Faults cleaning to these conditions. Do not immerse glass seals with the fireplace glass cleaner! CAUTION 7.1.2 Cleaning the metal surface Hot gases or liquids! Carefully clean metal surfaces with a damp cloth without Hot gases or liquids can escape if lines are leaking or glass cleaner. -
Page 23: Guillotine Door In Cleaning Position
Maintaining the heating technology 7.1.4 Guillotine door in cleaning position Open lock by swivelling the locking lever (A) to the left. NOTICE Broken vitroceramic window! The vitroceramic window can break. Do not support yourself or lean on the door when it is tilted. The door can be tilted in the cleaning position. -
Page 24: Rear Tilting Door In Cleaning Position, Lina Tv Kristall+ Model
Maintaining the heating technology 7.1.5 Rear tilting door in cleaning position, Carefully tilt back the door to its starting position and Lina TV Kristall+ model close the lock by pivoting the locking lever (A) to the right. Open lock by swivelling the locking lever (A) to the left and carefully tilting the rear door forwards. -
Page 25: Useful Hints In The Event Of Faults
Maintaining the heating technology Useful hints in the event of faults Fault Cause Remedy Chapter Wood too damp Use logs with a max. residual moisture content of 20 % (recommended 15 %). Wrong fuel Only use the fuels recommended in these instructions. 3.1/3.2 Use the size of logs recommended in the instructions. -
Page 26: Repair Hints
Repair hints Repair hints Disassembly and disposal Cracks in the combustion chamber All the packaging materials used are environmentally- lining friendly and recyclable: Cracks in the fire box lining fundamentally do not adversely Waste disposal key Type of waste affect the function of the fireplace insert. They only need to 15 01 01 Paper and cardboard packaging be replaced if pieces of the firebox lining have broken off and... -
Page 27: Technical Data
Technical data Technical data Operation with closed fireplace according to EN 13229 Lina GT Lina Lina Lina Lina Lina Lina 4545 s/h 4545 s/h 4580 h 5545 s/h 5580 h 6745 s/h 6780 h 4551 s/h 4551 s/h 5551 s/h 6751 s/h 4557 s/h 4557 s/h... - Page 28 Repair hints Operation with closed fire box in accordance with EN 13229 Lina GT Lina Lina Lina Lina Lina Lina TV 7363 7345 s/h 8745 h 8770 h 10045 h 12045 h 4545 s/h 7351 s/h 8751 h 10051 h 12051 h 4551 s/h 7357 s/h...
- Page 29 Repair hints Operation with closed fire box in accordance with EN 13229 Lina TV Lina TV Lina TV Lina TV Lina TV Lina TV 5545 s/h 6745 s/h 7345 s/h 8745 h 10045 h 12045 h 5551 s/h 6751 s/h 7351 s/h 8751 h 10051 h...
-
Page 30: Product Data Sheets - (Eu) 2015/1186
Product Data Sheets - (EU) 2015/1186 Product Data Sheets - (EU) 2015/1186 Lina 45 Name of the supplier Camina & Schmid Feuerdesign und Technik GmbH & Co. KG Supplier’s model ID Lina 45 GT s/h Lina 45 s/h · Lina TV 45 s/s, h/s Energy efficiency class Direct heat output (kW) Indirect heat output (kW) - Page 31 Product Data Sheets - (EU) 2015/1186 Lina 73 Name of the supplier Camina & Schmid Feuerdesign und Technik GmbH & Co. KG Supplier’s model ID Lina GT 7363 h Lina 73 s/h · Lina TV 73 s/s, h/s Energy efficiency class Direct heat output (kW) Indirect heat output (kW) Energy efficiency index (EEI)
-
Page 32: Energy Label
Energy label Energy label -80% -80% -80% Lina 45 s/h GT Lina 45 s/h, Lina TV 45 s/h Lina 55 s/h, Lina TV 55 s/h Lina 67 s/h, Lina TV 67 s/h -60% -60% -60% -40% -40% -40% -20% -20% -20% ENERGIA ·... -
Page 33: Technical Data - Eu 2015 (1185)
Technical data - EU 2015 (1185) Technical data - EU 2015 (1185) Technical documentation for individual room heaters for solid fuels - Regulation (EU) 2015/1185 supplementary to Directive 2010/30/EU: Name and address of the manufacturer: Camina & Schmid Feuerdesign und Technik GmbH & Co. KG Harmonised standards: EN 13229 :2001/A2 :2004/AC:2007 Other applied standards or technical specifications: none Indirect heating function (yes/no): no... -
Page 34: General Warranty Conditions
General warranty conditions General warranty conditions Warranty period and limitation period Depending on the product, the warranty period for our products starts with delivery of the product from the factory This product represents an innovative German quality prod- to the specialist firm or wholesaler and is: uct manufactured by Camina &... - Page 35 General warranty conditions Surfaces and ceramic glass Rectification of defects Discolouration of galvanised or painted surfaces, sooty or If the defects are recognised by Camina & Schmid as being annealed glazing, and all changes caused by the effects of under warranty, the defective parts will be repaired free of too high a heat are excluded from the warranty.
- Page 37 Warranty Certificate Thank you for choosing original Camina & Schmid fireplace technology. We offer a 5-year warranty on this product and 10-year spare parts warranty. That is our promise for putting your trust in our products. The warranty applies from delivery ex-factory. We require your proof of purchase or your invoice and this warranty certificate for our warranty to come into force.
- Page 38 product range Fireplace inserts Masonry inserts Fireplace cassette inserts Tiled stove/storage stove Schmid multi-control Gas fireplace inserts Storage stone systems Natural stone systems Hydronic technology Camina & Schmid Feuerdesign und Technik GmbH & Co. KG Gewerbepark 18 DE-49143 Bissendorf, Germany www.camina-schmid.de info@camina-schmid.de...
- Page 39 Commissioning Report Operator Contractor Name Name Address Address Town/City/Postcode Town/City/Postcode System data Appliance type Masonry insert Fireplace insert Masonry stove Description Additional circuit Type Heat exchanger Length (m) Ceramic flues Top mounted heat exchanger Rotary chimney Hot air top-mounted heat Other exchanger Hot water top-mounted heat...
- Page 40 Commissioning Report for Heating Integration Installation firm (if different) Name Address Town/City/Postcode Safety equipment Safety valve 2.5 bar actuating pressure 3.0 bar actuating pressure Installation outside of the heating chamber (in the heating flow, as close as possible to the appliance) Distance between the appliance and safety valve (m) Vent line connected (min.