Using 'Ct Gss Veces Tees Icecre Reerevedeqnssseaginsstans; Automatic Tone Frequency Id - Kenwood TM-261A Instruction Manual

"A" 94.5 Hz (RX)
"B": 100.0 Hz (RX) / 91.5 Hz (TX)
"CO: 103.5 Hz (RX) / 91.5 Hz (TX)
PY USING CTCSS
1
2
3
36
No Indicator —- TONE —» CTCSS
| (T) ("CT")
When you are called:
The squelch of your transceiver opens only when the
selected RX Tone is received.
When you make a call:
Press and hold microphone [PTT].
¢ The selected TX Tone is superimposed on your
transmitted signal.
m Automatic Tone Frequency ID .
2 Press any key to cancel the function.
« When OFF is selected for "TONE.RX' in Menu B
{page 17}, the Tone frequency selected for TO" in
Menu A is replaced by the Tone frequency
automatically identified in Step 1.
changed.