Valcom V-1080 Flexhorn Installation Manual

THREE WATT ONE-WAY PAGING HORN
INTRODUCTION
The Valcom V-1080 Flexhorn is a one-way
self-amplified paging horn designed to provide voice
paging as well as background music. This horn is
weatherproof and can be used indoors or outside in
environments ranging from -20 to +55°C. A volume
control is accessible on the front of the cone. The horn
is offered in gray, beige and white.
Model V-1080-GY
Model V-1080-BG
Model V-1080-W White
Dimensions/Weight
6.80"H x 8.30"W x 3.30"D
(17.27cm H x 21.08cm W x 8.38cm D)
2.1 lbs. (0.95 kg)
The V-1080 requires -24VDC, 150mA (3 Valcom
Power Units) and is FCC Part 68 Registered under
BAFUSA-69358-KX-N.
CONNECTIONS
Page
Out
Valcom Page
Control
NOTE: Do not connect this speaker directly to
a 25/70/100 Volt amplifier as damage to both
the amplifier and speaker may occur. A V-1095
can be used to provide an interface between a
centrally amplified speaker line and Valcom
self-amplified horns.
V-1080 FLEXHORN
Gray
Beige
(Tip/A) Green
One-Way
(Ring/B) Red
Amplified
(-24VDC) White
Speaker
(GND) Black
Valcom -24VDC
Power Supply
POWER WIRE RUN
# Horns per
Power Run Wire Run Length (feet)
V-1080
(3 Watts) 24 AWG
5 250
2 500
1 760

MOUNTING INSTRUCTIONS

FLUSH MOUNT
Using the template packaged with the speaker, draw the
speaker outline on the wall to be cut. Make appropriate
wiring connections and test the speaker for operation.
Using appropriate mounting screws (not furnished)
drill and mount the flange as shown.
UNIVERSAL BRACKET
Loosen or separate the universal bracket leaves by
loosening or removing the handle and hardware. Using
the back leaf as a template, mark the wall through the
mounting holes, drill and mount to the wall using
appropriate screws (not furnished) or mount directly to
a junction box.
1
VSP-V-1080
Issue 3
22 AWG
400
800
1200
947780