5.3
Reel torque
Forward torque
1.
2.
4.
Clean the tension pulley and reel base wheel.
Read
the reel torque
on the cassette torque
meter and make sure the torque is within 40 —
70 g.cm.
. If the torque
is not
correct,
turn the plate
shown
in the
figure
with
a screwdriver
or
tweezers
until
it is positioned
at the center
of the most suitable of the three cam surfaces.
If the
torque
is still
incorrect,
replace
the
tension pulley assembly.
Fast forward, rewind torque
1.
2.
Clean the idler pulleys and reel base wheels.
Read
the reel torque
on the cassette torque
meter and make sure-the torque is within 70 —
150 g.cm.
. If the torque is not correct, replace the idler
assembly.
Turning the plate adjusts the forward torque
to three different degrees.
Three cam
faces