Table of Contents
Advertisement
5.4
Shut-off mechanism
(1)
Adjusting the fink allowance
1. Turn
and position the shut-off pulley so that
the gear wheel pin (C) moves the shut-off lever
to its farthest position in the direction of the
arrow (a). (Fig. A)
2. Loosen
the screws
and
move
the clamp
arm
until the link allowance in the direction of the
arrow $ (d) is 0.1 — 0.3 mm, with the link held
positioned
in the direction of the arrow
+ (b)
by the link allowance. (Fig. A)
Note: After adjusting the link allowance, apply
screw
lock
paint to the clamp
arm
ad-
justing screws.
Shut-off
pulley
The farthest <_—_
position of
the fever
Move by the link <<—
allowance
b
Adjusting screw
Shut-off pulley
Advertisement
Table of Contents
