Advertisement
Available languages
Available languages
Connecting the System
O Connecting the FM Antenna
STR-GX80ES
For normal use
Supplied ribbon antenna
(or 300-ohm twin-lead)
For better FM reception
lod
te
75-ohm coaxial cable
{option)
STR-GX90ES
R 6CS
S
eCceiVv
For normal reception
Supplied ribbon antenna
(or 300-ohm twinlead)
External antenna
connector (supplied)
(oroyerar=rouelarem Unie
Val Ccaalarcemetaelelare|
To prevent hum, connect the ground wire to ANTENNA
ground terminal (,4,).
When an outdoor antenna is installed, be sure to connect
the ground wire for lightning protection.
For stable FM reception
A 75-ohm coaxial cable is free from external interference,
reduces noise pickup, and is the ideal transmission line for
most FM installations. 3C-2V cable is recommended.
Connect the 75-ohm coaxial cable to the supplied antenna
connector and connect it to the FM antenna connector.
@ Open the lid.
@ Strip the cable.
8 (°°/32) 10 ('7/32)
@ Remove the ring.
(Keep it in the projection on the lid.)
© Loosen the screws
and insert the cable
@ Coil the center conductor.
@ Snap the cover into piace.
Advertisement
