Stillwater Designs Kicker Impulse 356xi Manual

TTTim
Six-Channel
Power Amplifier
The impulse 356xi six channel power amplifier allows you to
create an outstanding stereo system based on a single
amplifier chassis.
Features and Controls
The Impulse 356xi Amplifier is 2 Ohm stable on all six channels; the sub out
can be bridged to as low as 4 Ohm mono. For connection to the source, you
have the option of low level RCA inputs or a high level input for use with
radios that don't have RCA outputs.
Separate electronic crossovers built in for your convenience allow you to
select full range or highpass for the front and rear channels as well as full
range or lowpass for the sub output.
Separate KICKEQ bass and treble controls give you the ability to boost low
and high frequencies to tailor the music to your taste.
Auto-resetting short circuit and overthermal protection circuits are
incorporated to protect the amplifier from failure due to extreme conditions.
State of the art circuitry including MOSFET power supply and glass epoxy
circuit boards are used to ensure many years of trouble free operation.
Wiring Instructions
The preferred method of bringing input signal to the amplifier is with RCA
cables from a quality tape or CD player. A high level (speaker) input signal may
also be used if your factory deck or aftermarket source does not have low-
level RCA jacks.
OPTIONAL HIGH LEVEL IN
REMOTE TURN-ON
FRONT RCA IN
REAR RCA IN
SUB RCA IN
FRONT & REAR & SUB
SPEAKER OUTPUT