How To Pair Jvaw62 Tx With Receiver - J5create JVAW62 Quick Start Manual

How to pair JVAW62 TX with receiver

1
Turn on pairing mode for receiver
Press the reset button (or insert the pin to press) for 2 seconds
on JVAW62 wireless display receiver. Release the button
when the screen shows "Release the button to pair with
ScreenCast". Please make sure your receiver has been
upgraded to the latest version.
2
Press the JVAW62 TX button
Plug JVAW62 TX on laptop or mobile to provide power. Press the
JVAW62 TX button to complete pairing while the screen shows
"Ready to pair".
Ready to pair
Note: There are 3 mode for reset button on receiver, depending
on pressing duration.
(1) Simple click: Switch the receiver to 2.4G/ 5G Hz Wi-Fi mode.
(2) Press for 2 seconds: Turn on pairing mode for JVAW62 TX.
(3) Press for 10 seconds: Reset the receiver to default.
Release the button to pair
with ScreenCast
2