The device may only be used by qualified and instructed persons after reading the user manual and safety instructions! Only use original parts from isi-sys GmbH. isi-sys GmbH does not give any warranty for damages or malfunction caused by additional parts not supplied by isi-sys GmbH. Additional cables or connectors will change the calibration and other specified data.
NOTICE! All maintenance or repair work, in particular the opening of the device and the adjustments, are to be done only by trained and qualified specialists of the manufacturer isi-sys GmbH, who are aware of the dangers involved. In case of malfunctioning or damaged system components, please contact us directly as the manufacturer.
For operation in pulse mode, connect a trigger source with a TTL level signal via a BNC cable. A synchronization with the image acquisition of DIC system can be done via this trigger input. We recommend special trigger devices from isi-sys GmbH. Optional Polarization filter The optional attachable polarization filter can be used to reduce direct reflections in combination with a camera where a polarization filter is attached as well.
GmbH, who are aware of the dangers involved. The warranty period for isi-sys components (excluding consumable items) is 1 year after delivery. The warranty expires in case of improper treatment or improper interventions (such as opening of the casings, etc.).
Need help?
Do you have a question about the Correlated solutions Blue-X-Lite and is the answer not in the manual?
Questions and answers