Table of Contents
Advertisement
Then, two "NEC PCI to USB Open Host Controller" will be displayed.
•
Select one of them and click the [OK] button.
Click the [Close] button. Now, you can unplug PLS5750.
•
• Remove the PLS5750 from your laptop. When removing the PLS5750,
always grip either sides of the card rather than the top and bottom of the
card. Gripping the top and bottom of the card and pulling the card can place
unnecessary pressure on the antenna and cause damage. Use the Card
Ejector tool on your laptop, if it is available.
When Inserting and removing the
PC Card, grip both sides.
Do not handle or remove the PC
Card by pulling on the antenna.
24
Advertisement
Table of Contents
