Table of Contents
Advertisement
5.3.3 Unplugging or Ejecting the Card
• Make sure to complete the unplug/eject process before removing the
PLS5750. If you remove the card improperly, the product can become
damaged.
• Double click the Unplug/Eject Hardware icon in the system tray.
Windows 2000
1) Unplug or Eject Hardware with Win2000
• As shown in the above figure, two "NEC PCI to USB Open Host Controller"
will be displayed in the Hardware devices list of Win2000. However, one of
them is disabled and marked with "V".
Select the device with no "V" mark. If you select it and click the "Stop" button,
the following window will appear.
• Select either of the "NEC PCI to USB Open Host Controller" and click the
[OK] button.
Windows XP
Windows Vista
21
Advertisement
Table of Contents
