10
Connecting
Connecting to your TV
Connecting Video (CVBS) /
Audio cable
Connect the VIDEO/AUDIO OUT on the unit to
VIDEO/AUDIO IN on TV with AV cable, such as
VIDEO with yellow, AUDIO Left/Right with white/
2
red.
Video/Audio Cable
Connecting SCART cable
Connect the SCART OUT on the unit to SCART IN
on TV with SCART cable.
Rear of TV
y You must set the [TV Output Select] option to
[RGB] on the setup menu to use this connection.
(See page 12)
Connecting Component Video
cable
Connect the COMPONENT VIDEO OUT on the unit
to COMPONET VIDEO IN on TV with COMPONET
cable, such as Y with green, Pb with blue, and Pr
with red.
Rear of TV
TV
Rear of the Unit
TV
Scart Cable
Rear of the Unit
Component
Cable
Rear of TV
y You must set the [TV Output Select] option
to [YPbPr] on the setup menu to use this
connection. (See page 12)
y You should still connect the AUDIO cable
between the unit and TV.
Connecting HDMI cable
Connect the HDMI OUT on the unit to the HDMI IN
on compatible TV with HDMI cable. (Type A, High
Speed HDMI™ Cable)
Rear of TV
HDMI Cable
Additional Information for HDMI
y When you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then
switch on this unit.
- The connected device's video input is set
correctly for this unit.
- The connected device is compatible with
720x576i(480i), 720x576p(480p), 1280x720p,
1920x1080i or 1920x1080p video input.
Rear of the Unit
TV
TV
Rear of the Unit