Pair The Headset With Your Bluetooth Device At The Rst Time; Pair The Headset With Another Bluetooth Device - Philips UpBeat 2000 Series User Manual

One of the headset LED ashes in
white and blue.
The headset is now in pairing mode
and is ready to pair with a Bluetooth
device (e.g. a mobile phone).
Turn on the Bluetooth function of
your Bluetooth device.
The headset with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
The headset has voice "Connected"
and LED lights goes o . You can use
your device to play music or make a
call.
Note
 After powering on, if the headset cannot nd any
previously connected Bluetooth device, it will
automatically switch to pairing mode.
The following example shows you how
to pair the headset with your Bluetooth
device.
Turn on the Bluetooth function of
your Bluetooth device, select Philips
SHB2505.
Enter the headset password "0000" (4
zeros) if prompted. For those
Bluetooth devices featuring
Bluetooth 3.0 or higher, no need to
enter a password.
Single headset pairing
(Mono mode)
Take the either headset from the charging
case, the earpiece will power on automati-
cally. There will be a voice "Power on" from
right headset.
Turn on the Bluetooth function on your
device, search for "Philips SHB2505" tap to
connect. (Please refer to P.6)
Once the pairing succeed, you will hear a
voice "Connected" and the indicator light
will be o .
Pair the headset with
another Bluetooth device
If you have another Bluetooth device that you
want to pair with the headset, make sure the
Bluetooth function in any other previously
paired or coonected devices are turned o .
Then follow the steps in 'Pair the headset with
your Bluetooth device at the rst time' .
Note
 The headset stores 1 device in the memory. If you try
to pair more than 2 devices, the earliest paired device
is replaced by the new one.