Verizon impulse CDM7075 User Manual page 137

SAFETY
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government adopted requirement for
safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC
for each model.
The highest SAR value for this model phone when tested for use
at the ear is 1.15W/Kg and when worn on the body, as described
in this user guide, is 0.393W/Kg. (Body-worn measurements
differ among phone models, depending upon available
accessories and FCC requirements). While there may be
differences between the SAR levels of various phones and at
various positions, they all meet the government requirement for
safe exposure.
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on O6Y-CDM7075.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications & Internet Association
136