Table of Contents
Advertisement
TO ERASE INACTIVE CHANNELS
Select the receivable source.
for UHF
for CATV
for VHF
Either
position will
do.
Channel indicator
Number of
channel
erased
Repeat the above for all
fhe channels to be erased.
To add once-erased channels again
See "To add UHF or CATV channels" on page 16.
Operating note: It is not possible to erase a UHF channel from the
memory and retain the CATV channel of the same number in the
memory, or vice versa.
If either the UHF channel or the CATV channel of the same number
is to be kept in the memory, do not erase the number.
17
Advertisement
Table of Contents
