Table of Contents
Advertisement
OPERATION OF THE REMOTE COMMANDER
Once the MASTER button has been switched on, you can remotely
control the TV with this Commander up to 7 meters (23 feet) away
from the TV and within the angle illustrated below.
j
Turn on the power.
2
Select the desired channel with channel number
button* or the CHANNEL buttons.
Adjust the picture contrast.
4 Adjust the volume.
*Channel selection with the channel number buttons
Example
channel 25
channel 7
For channels 2 through 9, press
the 0 button first.
Example |
When you wish to select channel 7, and you forgot to press the 0
button first.
incorrect
number
Wait about 3
seconds.
l
m
The previous number
display is recalled.
Press the
[—correct channel
number buttons.
Press the CLEAR button.
The picture will
disappear (only
snow shows) and
the sound will
go off.
Notes on the Remote Commander
• In normal operation, battery life is up to
half a year. When the battery is exhausted,
the Remote Commander will not operate
the TV properly. In this case, replace the
batteries with new ones.
• When the Commander is not used for a
long period of time, remove the batteries to
avoid
damage
from
possible
battery
leakage.
• Keep the Commander away from ex¬
tremely hot or humid places.
• Avoid dropping any foreign objects into
the Commander case when replacing bat¬
teries.
• The RM-707 Commander may be used on¬
ly with those Sony color TV models in¬
dicated in the operating instructions.
15
Advertisement
Table of Contents
