Table of Contents
Advertisement
10
www.electrolux.com
1
1
2
1. Put two polystyrene packaging
elements on the floor under the
appliance.
2. Carefully put the appliance down on its
rear side.
3. Remove the polystyrene protection
from the bottom.
2
4. Return the appliance in vertical
position and remove the socket
polystyrene protection.
5. Remove the power supply cable and
the drain hose from the hose holders.
WARNING!
It is strongly
recommended that this
action is carries out by two
persons.
Make sure not to damage
the hoses.
It is possible to see water
flowing from the drain
hose. This is due to the
testing with water of the
appliance in factory.
Advertisement
Table of Contents
