Original Packaging; Other Packaging Methods; Storage - HP 5344S Operating Instructions Manual

Microwave source synchronizer
Table of Contents

Advertisement

Model 5344S
Installation
2-33.
To determine if the instrument is operating properly, refer to the operational verification
in Section IV. Contact your nearest HP Sales and Support Office (see manual back cover) for
information concerning warranty claims.
2-35.
Original Packaging
2-36.
The same containers and materials used in factory packing can be obtained through the
Hewlett-Packard Sales and Support Office listed at the rear of this manual.
2-37.
Since the 5342A/5343A Microwave Frequency Counter is an integral part of the 5344S
System, the counter should be returned with the 5344A when service is required.
2-38.
If the instrument is being returned to Hewlett-Packard for service, attach a tag indicating
the type of service required, return address, model number, and full serial number. Mark the
container FRAGILE to assure careful handling.
2-39.
In any correspondence, refer to the instruments by model numbers and full serial
numbers.
2-40.
Other Packaging Methods
2-41.
If it becomes necessary to re-ship an instrument, good commercial packing should be
used. Contract packaging companies in many cities can provide dependable custom packaging
on short notice. The following general instructions should be followed when repackaging with
commercially available materials.
a.
If shipping to a Hewlett-Packard Office or Center, attach a tag indicating the type of
required, return address, model number, and full serial number.
b.
Wrap the instrument in heavy paper or plastic.
c.
Use a strong shipping container. A double-wall carton made of 350-pound test material is
adequate.
d.
Use enough shock-absorbing material (3- to 4-inch layer) around all sides of the instrument
to provide a firm cushion and prevent movement inside the container. Protect the front
panel with cardboard.
e.
Seal the shipping container securely.
f.
Mark the shipping container FRAGILE to assure careful handling.
2-42.
STORAGE
2-43.
If the instrument is to be stored for an extended period of time, it should be enclosed in a
clean, sealed container.
2-9

Advertisement

Table of Contents
loading

Table of Contents