How To Play Records; Normal Play - Pioneer PL-X505 Operating Instructions Manual

HOW TO PLAY RECORDS
PROCEDURES BEFORE PLAYING
(5) (4)
(1) Push in the POWER switch and switch ON
power.
(2) Open the dust cover.
(3) Place a record on the platter.
(4) Press the SPEED selector switch so as to
select the correct speed.
Press the SIZE selector switch, and set it to
the size of your record.
(6) Close the dust cover.
(7) Set your stereo amplifier for playing a record.
For details refer to the operating instructions for
your stereo amplifier.
(5
—
PROCEDURES AFTER PLAYING
(1) Open the dust cover and remove the record.
(2) Push in the POWER switch to the STAND-BY
position.
OPERATIONS FOR NORMAL PLAY (AUTO
PLAY)
Automatic play of all tracks, from the first track to the
last track.
(1) Carry out "PROCEDURES BEFORE PLAY-
ING",
(2) Press the PLAY switch and begin playing the
record,
(3) Adjust the volume and tone controls of the
stereo amplifier.
After the last track has been played, the tone arm
will return and the turntable will stop autormati-
cally.
After finishing playing records, carry out the
"PROCEDURES AFTER PLAYING".
(4
—
OPERATIONS FOR MANUAL PLAYING
Use these operations for the following purposes.
To start playing from part way through a track.
@ When the record is not a standard size (not the
same as the mat size), and cannot be played
normally.
(1) Carry out "PROCEDURES BEFORE PLAY-
ING".
(2) Press the LOCATE switch, and move the
tone arm to the record.
(3) Press the ARM ELEVATION switch, and
begin playing the record.
{4} Adjust the volume and tone controls of the
stereo amplifier.
(After the last track has been played, the tone
arm will return automatically.)
(5) After finishing playing records, carry out the
"PROCEDURES AFTER PLAYING".
7:
<PRB-309 >