Download Print this page

Feiyu Scorp Mini 2 Quick Start Manual page 2

Advertisement

2.2 Adjust the gimbal to gimbal balancing position
The gimbal is folded by default, please unlock all the three axes and adjust the gimbal to
gimbal balancing position, and then lock the three axes.
3
2
1
Gimbal folded position
2.3 Installing fixing accessories
When using cameras, phones, and other shooting devices, you need to install the fixing
accessories first.
[1]
[2]
[3]
Equipped
[1] Fixed Plate
devices
[2] Slider
Mirrorless
camera
[3] Quick release plate+
screw
Pocket camera
[4] Lens holder+ screw
[5] GoPro adapter+ screw
Action camera
[6] Smartphone holder
Smartphone
Gimbal balancing position
+
+
+
[4]
[5]
[6]
Fixing
Installation reference
accessories
Horizontal mounting : [1] + [2] + [3] + [4]
Horizontal
Vertical mounting : [2] + [3] + [4]
mounting: [1]
Horizontal mounting : [1] + [2] + [3]
Vertical mounting : [2] + [3]
Vertical
Horizontal mounting : [1] + [2] + [3] + [5]
mounting: [2]
Vertical mounting :[2] + [3] + [5]
[6]
[6]
EN
Install the fixed plate [1]:
Unlock
1
You can also install the slider [2] or smartphone holder [6] in the same way.
1
3. Mounting the shooting equipment
Take camera mounting as an example.
Before mounting the camera, make sure the camera is ready for shooting (Install the camera
lens, and the lens cover should be removed, the memory card and battery needs to be
inserted to the camera, and battery is fully charged) , complete all the steps which mentioned
in chapter "2. Getting started" and the gimbal is adjusted to
Make sure the gimbal is powered off or in sleep mode before mounting the camera.
3.1 Attach the quick release plate
Attach the quick release plate to camera by tightening
the screw.
If the camera doesn't have the 1/4-20 inch screw hole,
please put the camera on mount adapter, which has
1/4-20 inch screw hole, and then follow the steps above
to mount it.
Users can mount smartphone into the optional
smartphone holder, and follow the steps above to install
it on the gimbal.
- 4 -
, slide
into the slot, and lock
.
2
gimbal balancing
position.
1
1

Advertisement

loading