Chapter 4 Advanced Operation Locating The Loudest Portion Of The Disc - Peak Search - Sony CDP-C535 Operating Instructions Manual

wrap + MUVAICEO UPE
You can locate the portion with the highest input level of the disc to adjust the
recording level.
Continuous or shuffle play mode
- Searches all selections on the disc which is ready to be played in ALL DISCS as
well as in 1 DISC mode.
Program play mode
— Searches all programmed selections.
; To stop peak search
PI k
aying Peak Search Press W.
Press > to start play from the beginning of the disc.
Press fl to pause at the first selection.
> ua DISC SKIP "PEAK" will disappear from the display.
To go to another disc
Press DISC SKIP during stop.
Notes on Peak Search
* The unit scans input levels of the whole disc and determines the peak
(maximum input level) among them. The peak determined with this
function is sometimes slightly different from the real one. In addition,
portions determined as a peak vary each time this function is carried out
on the same disc. The difference between the determined and the real peak
is however, negligible and will not prevent you from adjusting the
recording level.
Peak search does not work if you press EX-CHANGE to open the disc tray.
PEAK SEARCH
Press PEAK SEARCH during stop.
PEAK SEARCH
"= D 29,9 &
poge
"PEAK" flashes in the display. All the selections in the
disc or program will be searched automatically. The
loudest portion will play repeatedly for 4 seconds.
Adjust the recording level on your tape deck according
to the peak level.
21