Advertisement
Tape Recording
Recording from a program source (FM/AM broadcast, turn-
table, compact disc player or sound track of video compo-
nent) on a tape deck connected to the TAPE 1 and/or TAPE 2
jacks:
1. Turn the
VOLUME control knob to the minimum level and
press the POWER switch. The
POWER indicator lights up.
3. Select the desired program source with the FUNCTION
selector.
_ Set the TAPE MONITOR selector to the Source position.
. Advance the
VOLUME control knob to a comfortable level.
_ If the program source mode is monaural, press the Mode
switch to the Mono position.
7. Start recording by activating the tape deck(s) connected to
the TAPE 1 and/or TAPE 2 jacks. The source sound can be
listened to from the speakers or headphone.
8. To monitor the sound
being recorded,
set the TAPE
MONITOR selector to the Tape 7 or Tape 2 position ac-
cording to the tape deck that you wish to monitor.
aon
NOTE: The record output signal is carried directly from the
program source without being influenced by the VOLUME,
BALANCE, BASSand
TREBLE controls, Phase Correct Loud-
ness, Subsonic and External Processor switches
of this unit.
Tape Dubbing
Two tape decks canbe connected to this unit and dubbing can
be done from the tape in the tape deck connected to the TAPE
1 jacks onto the tape in the tape deck connected to the TAPE
2 jacks.
1. Turn the VOLUME control knob to the minimum level and
press the POWER switch. The
POWER indicator lights up.
2. Set the TAPE MONITOR selector to the Copy 7 to 2
position.
3. If the program source mode is monaural, press the Mode
switch to the Mono position.
4. After setting the tape deck connected to the TAPE 1 jacks
for playback, and the tape deck connected to the TAPE 2
jacks for recording, dubbing will begin.
NOTE: You can listen to a program source selected via the
FUNCTION selector while dubbing is taken place.
To monitor the sound being recorded, use the headphones
connected to the phones jack of tape deck.
Copyright Information
Recording of copyrighted material for other than
personal use is illegal without permission of the
copyright holder.
OPERATIONS
Tape Playback
1.
2.
3.
Turn the
VOLUME control knob to the minimum level and
press the
POWER switch. The
POWER indicator lights up.
Set the SPEAKERS
selector for the desired
speaker
system(s).
Set the TAPE MONITOR selector to the Tape 7 or Tape
2 position corresponding to the tape deck to be played.
. Insert a recorded tape in the tape deck and set the tape
deck in the playback mode.
. Advance the
VOLUME control knob to a comfortable level
and adjust the BASS and TREBLE control knobs as de-
sired.
. Activate the
BALANCE control knob, Phase Correct Loud-
ness or Mode switches if necessary.
. When using a component (such as a graphic equalizer,
surround processor) connected to the EXTERNAL PROC-
ESSOR jacks on the rear panel, press the External Proces-
sor switch and set it to the /n Line position.
Advertisement
