Advertisement
ben
we
ee
en
Listening to a Record (Disc)
ie
10.
11.
Turn the VOLUME control knob to the minimum level and
press the POWER switch. The POWER indicator lights
up.
. Set the SPEAKERS selector for the desired speaker
system(s).
. Set the FUNCTION selector to the Phono position.
. Set the Cartrige selector to the MM position when a
turntable with
a MM
(moving magnet) cartridge con-
nected to the PHONO MM jacks is to be used and to the
MC position for a turntable with a MC
(moving coil)
cartridge connected to the PHONO MC jacks.
. Set the TAPE MONITOR selector to the Source position.
. Activate your turntable and place the stylus on the record
(disc).
. Turnthe VOLUMEcontrol knob clockwise to increase the
sound volume to the desired level.
. lf the disc has a large warp, press the Subsonic filter
switch.
. Adjust the
BASS and TREBLE control knobs to obtain the
desired tone.
Activate the BALANCE
control
knob,
Phase
Correct
Loudness or Mode switches if necessary.
When using a component (such as a graphic equalizer,
surround processor) connected to the EXTERNAL PROC-
ESSOR jacks on the rear panel, press the External Proc-
essor switch and set it to the /n Line position.
NOTE: If you hear a hum at average listening levels, turn the
POWER switch off and check to see that the phono and the
ground connections are secure. Depending on the cartridge
type used, less hum may be created without the ground
connection.
Listening to Radio Broadcasts
1.
No
aOokw
Turn the VOLUME control knob to the minimum level and
press the POWER switch. The
POWER indicator lights up.
. Set the SPEAKERS
selector for the desired
speaker
system(s).
. Set the FUNCTION selector to the Tuner position.
. Set the TAPE MONITOR selector to the Source position.
. Activate the tuner and tune to broadcast frequency.
When a monaural broadcast is received, press the Mode
switch to the Mono position.
. When the desired station is selected, advance the VOL-
UME control knob to a comfortable level and adjust the
BASS and TREBLE control knobs as desired.
. Activate the BALANCE
control knob or Phase
Correct
Loudness switch if necessary.
. When
using a component (such as a graphic equalizer,
surround processor) connected to the EXTERNAL PROC-
ESSOR Jacks on the rear panel, press the External Proces-
sor switch and set it to the /n Line position.
Listening to a Compact Disc
ls
2.
B
Turn the VOLUME control knob to the minimum level and
press the POWER switch. The
POWER indicator lights up.
Set the SPEAKERS
selector for the desired
speaker
system(s).
. Set the FUNCTION selector to the CD position.
. Set the TAPE MONITOR selector to the Source position.
. Activate the compact disc player and set the player in the
play mode.
. Advance the VOLUME control knob to a comfortable level
and adjust the BASS and TREBLE control knobs as de-
sired.
. Activate the
BALANCE control knob, Phase Correct Loud-
ness or Mode switches if necessary.
. When using a component (such as a graphic equalizer,
surround processor) connected to the EXTERNAL PROC-
ESSOR jacks on the rear panel, press the External Proces-
sor switch and set it to the /n Line position.
Listening to the Video Input Source
To listen to a video component, TV tuner or other auxiliary
component:
1.
NO
amb
WwW
Turn the
VOLUME control knob to the mimimum level and
press the POWER switch.
The POWER indicator lights
up.
. Set the
SPEAKERS
selector
for the disired
speaker
system(s).
. Set the FUNCTION selector to the Video position.
. Set the TAPE MONITOR selector to the Source position.
. Activate the component connected to the VIDEO jacks.
. Advance the VOLUME control knob to a comfortable level
and adjust the BASS
and
TREBLE
control
knobs
as
desired.
. Activate the
BALANCE control knob. Phase Correct Louda-
ness or Mode switches if necessary.
. When using a component (such as a graphic equalizer,
surround processor ) connected to the EXTERNAL PROC-
ESSOR jacks on the rear panel, press the External Proces-
sor switch and set it to the /n Line position.
Advertisement
