attaching the strap (Flg.1)
1. Insert the small loop at the end of the
Strap under the strap eyelet.
2. Insert the other end of the strap through
eyelet"'^
• The protruding part of the strap adjust¬
ment clip can be used to press the small
Duttons on the camera.
INSERTING THE BATTERY
^ 'battery chamber cover latch
cover'^(Fi| 2)'^'' P'''ection and open the
!hff^
Af size batteries, checking
that (+) and (-) on the battery are aligned
polarity information
inside the battery chamber, (Fig.3)
poshing it back till it
locks firmly in place with a click.
11
• Remove batteries from the camera when
you do not expect to use it for a long peri¬
od time.
CHECKING THE BATTERY
rbr,!'*
'0 camera can be
checked at each power on.
The condition of the battery is displayed on
the LCD panel.(Fig. 4)
's displayed
If
the battery is in good condition
■ I mi's
displayed
If tf^
battery is nearly exhausted. When
shown there is enough power to
battery^
before replacing the