Table of Contents
Advertisement
HOW TO USE REINVO?
TO CHARGE
⚠ Note: The device will NOT light up when
charging.
There are two ways to charge the Microdermabrasion
Wand.
OPTION 1: Place the wand in the groove of the charging
base, fitting the device onto the pin. Then, insert the USB
cord.
OPTION 2: Insert the USB cord directly into the bottom of
the wand.
It takes approximately three hours to fully charge the wand.
At this point, the wand will automatically stop charging and
the smart screen will show the fully charged icon.
Fully Charged
Charging Indicator
Advertisement
Table of Contents
