Hobartville Hobbies GAF Turana Assembly Manual

GAF Turana
1/35 scale model kit
ASSEMBLY GUIDE
Thank you for purchasing this model kit. We hope that it exceeds all your
expectations and that you enjoy assembling it. Before y ou begin, please
make sure you study this guide carefully and that you remove any
remaining pieces of the supports. The parts of this kit are 3D printed and
supports are generated as part of that process. They have mostly been
removed but the tips of some supports may remain. When removing
them, or working with any resin product, please wear a dust mask.
This kit is a limited-run 3D printed kit. As a 3D printed kit, it is built in
extremely thin layers which may be visible after painting. These layers
are very thin but you may want to sand them smooth for the best finish.
Cyanoacrylate glue or epoxy glue should be used to join the pieces
together. Care should be taken to use these products in a well-ventilated
area and gloves should be worn.
Please go through these instructions carefully before beginning assembly.
Many parts will need painting before glueing into place. Always test-fit
parts before glueing.
Kit and instructions ©2023 Hobartville Hobbies. Proudly made in Australia.
HHK-35001
HOBARTVILLE HOBBIES
GAF Turana
1/35 scale model kit
BEFORE YOU BEGIN
Decals by Dekl's Adelaide, South Australia
d
d