Table of Contents
Advertisement
Preparation
• Unpack all the packaging materials including the base and adhesive tape.
• Check the accessories and documents inside the package according to packing list, contact the shop from
which you purchased if anything is missing.
• Put refrigerator in an appropriate place. If it is not stable, you may fix the problem by adjusting the adjustable feet.
• It is suggested to clean the refrigerator before usage.
• After installation and adjustment, wait for at least 6 hours before connecting the appliance to ensure the
refrigerator can function normally.
Power On
• For first use, you need to turn the knob for both fridge and freezer to the middle. Put all the accessories in
place according to the component diagram.
• Connect the refrigerator and close the doors, then check if the compressor works normally, and also check if the
two sides of the refrigerator become heat (being heated is a normal phenomenon).
• The freezer should obviously cool down after the refrigerator works for half an hour. Put foods in the refrigerator
after it starts for 2-3 hours (4 hours is needed if the room temperature is high in summer).
29
Using your Appliance
Advertisement
Chapters
Table of Contents
