Tractor Identification - MASSEY FERGUSON MF2400 Series Operation And Maintenance Manual

Tractor identification

Tractor identification
The tractor is identified by a serial number stamped on
the rear part of the transmission housing and on the
bonnet. Each engine has a serial number of its own,
stamped on the engine block.
Always state the chassis and engine serial numbers to
ensure prompt and efficient service when ordering
spare parts or when asking for technical explanations
or other information.
Chassis serial number, Fig.1-2 and Fig.1-3 ....................
Engine serial number, Fig.1-1 .........................................
Cab serial number, Fig.1-4 ..............................................
Type of tractor .................................................................
Owner / Operator ............................................................
Address of Dealer ............................................................
.........................................................................................
Delivery date ....................................................................
Warranty expiry date .......................................................
NOTE: Look after this Operation and Maintenance
Manual carefully and consult it whenever in doubt.
This publication has been written in compliance with International Standard ISO
3600 'Guide for: information, contents and presentation of operation and
maintenance manuals supplied with tractors and machinery for agricultural and
forestal use'.
Fig.1-3 -Front axle type and serial number (on axle
housing).
6
Fig.1-1 - Engine serial number.
Fig.1-2 -Type of tractor and chassis serial number (on
lower dashboard panel).
Fig.1-4 - Cab type and serial number (on rear cab pillar).
Find manuals at https://best-manuals.com