KAKA Industrial SBG-30 Operation Manual

Operation Manual
KAKA
Specifications
Model............................................SBG-30
Stock No. ......................................173217
Round steel...............................￠. 10mm
Flat steel...................................30x10mm
Square steel.............................10x10mm
Packing Size........................24x24x15cm
Net Weight.....................................24kgs
Unpacking
The UNIVERSAL BENDER is shipped
from the manufacture in a carefully
packed Carton box. Thoroughly inspect
the product upon opening the package.
After unpacking the unit, carefully inspect
for any damage that may have occurred
during transit.
If damage has
damage claims must be filed with the
carrier and are the responsibility of the
user.
®
Industrial
occurred, shipping
Check for completeness. Immediately
report missing parts to dealer.
Carefully open crate and unbolt brake
from shipping pallet and remove from
crate using heavy duty lifting equipment
such as an overhead crane.
Warning
The warnings, cautions and instructions
discussed in this instructions or situations
that could occur. It must be understood by
the operator that common sense and
caution are factors which cannot be built
into this product, but must be supplied by
the operator.
SAVE THIS MANUAL
You will need this manual for the safety
instruction,assembly
operating procedures, parts list, and
diagram. Write your invoice number on
the inside front cover. Put both your
manual and invoice in a safe, dry place for
future reference.
- 1 -
SBG-30
instruction,