Download Print this page

Advertisement

Quick Links

NOTICE
*Please make sure that you have all parts indicated and they are in good condi�on before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so� surface to prevent scratching the finish during
assembly.
*This item may require periodic �ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email customersupport@safavieh.com
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*If any part is missing or damaged, do not a�empt to assemble the product.
*Es�mated Assembly Time: 60 minutes.
*Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Always use felt pads under all ar�cles to prevent discolorra�on or so�tening of the lacquer.
Plas�c and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a so� lint free co�on cloth dampened with water or furniture polish. On highly used surfaces
we recommend applying a quality paste wax shich should be used on a reguler basis to provide
addi�onal protec�on from scratches and spills. How o�en you apply the wax depends on how
much wear the furniture receives.
Part List
L
F
C
J
J
I
H
I
A
K
E
L
L
L
F
J
J
B
G
H
I
I
Item ID: MED9621
Product Dimensions: 61.7"Wx17.7"Dx32.2"H
This product is intended for use with a
Maximum Screen Size: 55 inches
D
Use with heavier televisions may result
in instability causing �p over resul�ng in
Death or serious injury may occur
FLAT SCREEN TV ONLY
when children climb on audio
and/or video equipment furniture.
Weight Limit: 100 Ibs
A remote control or toys placed on
Shelf Load Limit: 41 Ibs
the furnishing may encourage a
Drawer Load Limit: - Ibs
child to climb on the furnishing and
as a result the furnishing may tip
over on the child.
death or Serious injury.

Advertisement

loading

Summary of Contents for Safavieh Furniture Helena MED9621

  • Page 1 NOTICE *Please make sure that you have all parts indicated and they are in good condi�on before you begin assembly of this item. Refer to part list and hardware list below for guidance. *This item should be assembled on a so� surface to prevent scratching the finish during assembly.
  • Page 2 Hardware List HW1x22 HW2x22 HW3x38 HW4x12 HW5x48 M 4.5 x 12.5 mm Ø 6 x 35 mm Ø 15 mm M 6.4 x 53 mm Ø 8 x 30 mm HW6x6 HW8x14 HW9x8 HW10x1 HW7x2 M 7 x 50 mm M 6 x 12.5 mm Ø...
  • Page 3 Part List & HW For Mul�-Box Items Piece Descrip�on Carton Call Piece Descrip�on Carton Call 1 of 2 Top Board Cambolt 2 of 2 1 of 2 Bo�om Board CamLock 2 of 2 Side Board Le� 1 of 2 Dowel Small 2 of 2 Side Board Right 1 of 2...
  • Page 4 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list. If any part is missing or damaged, do not a�empt to assemble the product. Es�mated Assembly Time: 60 minutes. STEP2: Insert Cambolt (HW1) into Bo�om Board Board (B), STEP1: Insert Cambolt (HW1), Push Tool (HW16) and Screw 3.5 x 13 mm Insert Dowel (HW3)into Center Board ( E ) ,Side Board Le�...
  • Page 5 STEP6: Put Bo�om Board (B) and secure with Screw M7x50 (HW6) , �ghten screws using Allen Key (HW7),Insert Camlock (HW2) STEP5: Insert Backboard (L) onto the Top Board (A), Insert Camlock then �ghten using screwdriver. (HW2) then �ghten using screwdriver. ±...
  • Page 6 ± 2 mm Do not �ghten screw yet STEP10: Insert Dowel (HW3) into assembled bo�om skirt. STEP9: Combine the Support Leg 2 from step 8 with remaining Support Leg 1 (G), using Screw M4x16 (HW20). Fixing The Legs Do not over�ght screw yet, leave around 2mm gap. STEP12: Remove plas�c cap from Legs.
  • Page 7 US12 STEP14: A�er bringing the product upright, insert Shelf Pin (HW9) into the holes on Sideboard & Centerboard, on the desired level. Then place the Adjustable Shelf (F) by inser�ng the hole on the shelf STEP13: Insert An� Deflec�on Bar (HW US12),Screw M6x12.5 (HW8) into the shelf support into Bo�om Board.Peel off...
  • Page 8 TIPPING RESTRAINTS KIT INSTALLATION GUIDANCE Different wall materials require unique wall fasteners. The wall plugs (AA2) and screws (AA3) are designed for fixing to concrete walls only. Please consult your local hardware store to ensure you are using the correct hardware for your wall type. AA1 x 2 AA2 x 4 AA3 x 4...
  • Page 9 HOW TO ADJUST HINGES To adjust the ver�cal height. Loosen the four screws “A” on both hinges. Two of them are usually in slo�ed holes which allows you to adjust up or down by few mm. Then �ghten back up. To adjust depth.
  • Page 10 HOW TO ADJUST HINGES To adjust depth. Loosen screw “B” and adjust door, if the door can not be adjusted, please loosen screw “C”, then try again. Tighten screw “B” and “C”. To adjust side ways. Turning the screw “C” on BOTH hinges on each door.