Subscribe to Our Youtube Channel
Related Manuals for RocwooD RWHPPW4
Summary of Contents for RocwooD RWHPPW4
- Page 1 HIGH POWER PRESSURE WASHER RWHPPW4 & RWHPPW4ES RocwooD Instruction Manual NOTE: PLEASE READ INSTRUCTIONS CAREFULLY BEFORE USE.
- Page 2 . Wear protective gloves! Regulate engine speed! Choke:open/close,petrol: on/off Wear safety shoes! TECHNICAL PARAMETERS: MODEL: ............RWHPPW4 ENGINE: ............4-STROKE OHV ENGINE OUTPUT: ............8HP (5.25 KW)/3600 RPM DISPLACEMENT: ..........196CC MAXIMUM PRESSURE:.......3950 PSI (272 BAR) CONTINUOUS PRESSURE: .......3000 PSI (207 BAR) RATED FLOW: ..........8.5L/MIN...
- Page 3 MAINTENANCE AND STORAGE • Do not attempt to modify the product in any way. • To ensure good operating condition arrange regular servicing from an authorised agent. • Only use replacement parts supplied by the manufacturer • Only use fresh,clean and good quality fuel in the engine. •...
- Page 4 ASSEMBLY INSTRUCTIONS NOTE: Every machine is tested during production, so there may a few drops of water inside the pump assembly FIG. 1 FIG. 2 FIG. 3 TO ASSEMBLE THE WHEELS Fit a wheel to the axle and (Figs. 2-3): secure using the locking nut Ensure the appliance is kept in the provided.
-
Page 5: Fig. 8
FIG. 9 FIG. 8 Connect the high pressure HIGH PRESSURE hose to the trigger B. Insert CONNECTION the lance C into the trigger. (Figs. 8 - 9): Press firmly against the spring Connect the high pressure tension and twist hose A to the units high the coupling into the locked pressure outlet. -
Page 6: Fig. 12
WATER SUPPLY FROM THE WATER MAIN • Connect a water supply hose (not supplied) to the water inlet connection of the pressure washer. • Turn on the water supply and pull the trigger until water is continually fl owing out of the nozzle. WATER SUPPLIER FROM A CONTAINER •... -
Page 7: Fig. 14
ELECTRIC START RWPPW4ES Switch from ‘OFF’ position to ‘START’ Once running allow switch to return until engine fires. MAX 5 seconds*. to ‘ON’ position. ON START ON START ENGINE SWITCH If the engine fails to start within 5 seconds release the switch and wait at least 10 seconds before trying again. - Page 8 FIG. 18 FIG. 19 FIG. 17 Pull the black starting rope Let the engine idle for a short When the appliance is in handle gradually until you while to preheat before operation, the speed can be feel resistance; then make a pushing the choke lever C to adjusted by moving the rapid pull.
- Page 9 NOTE: Before using the pressure washer to clean patio paving slabs it is advisable to test a small area first, some paving slabs are manufactured from inferior materials and the use of a pressure washer could damage the surface. USING THE DETERGENT FACILITY (Fig. 23) Fill a suitable container with pressure washer detergent.
- Page 10 PRE-OPERATION INSPECTION CAUTION: Engine oil is a key factor in deciding the engine’ s performance. Do not use engine oil with additives or 2-stroke gasoline engine oil, as they do not have enough lubricating properties, which may shorten the engine’ s service life. 1.
- Page 11 FUEL AND FUEL TANK: Only use unleaded petrol or fuel. Using unleaded petrol or fuel will decrease the possibility of producing carbon deposits and prolong the engines service life. Never use old or polluted petrol or fuel or a mixture of petrol and engine oil.
- Page 12 EXHAUST CONTROL SYSTEM With the engine running, carbon monoxide, nitrogen oxide and hydrocarbon are produced, and in certain conditions nitrogen oxide and hydrocarbon will react together to make smoke while carbon monoxide is toxic, so exhaust control is very important. The manufacturer decreases exhaust emissions by introducing poor fuel carburettors and other devices to solve the problem.
- Page 13 TRANSPORT Transport with the fuel switch in the off position. Ensure the engine is cooled so as to avoid the risk of burns or fi re. CAUTION: Do not tilt the engine to avoid spilling fuel. Spilled fuel or fuel vapour may ignite. STORAGE If the engine is not to be used for a long period of time ensure it is stored correctly.
- Page 14 To keep the engine in sound condition, the user should maintain it according to the table below. CAUTION: Use parts that are supplied by the manufacturer, otherwise damage to the engine may occur. WARNING: Stop the engine before servicing. If servicing is required with the engine running ensure there is good ventilation in the area.
- Page 17 EC DECLARATION OF CONFORMITY We SDG TRADING LTD of Rocwood House, Lightwood Green Industrial Estate, Overton-on-Dee, Wrexham, LL13 0HU (importer) declares that the product: Designation: Petrol High Pressure Washer Model(s): RWHPPW4, RWHPPW4ES COMPLIES WITH THE PROVISIONS OF THE FOLLOWING EUROPEAN DIRECTIVES: 2006/42/EC MACHINERY DIRECTIVE 2014/30/EU EMC DIRECTIVE ‐‐ COMPLIES WITH THE PROVISIONS OF THE FOLLOWING HARMONIZED STANDARDS: EN 60335‐2‐79:2012 EN 55012:2007+A1 EN 61000‐6‐1:2007 ‐‐ Notified Body: TÜV Rheinland LGA Products GmbH Address: Tillystraße 2, 90431 Nürnberg, Germany ...
Need help?
Do you have a question about the RWHPPW4 and is the answer not in the manual?
Questions and answers