Alto Busker User Manual page 18

If you cannot connect your audio device to Busker via Bluetooth:
•
Have your audio device (e.g., smartphone or tablet) and Busker as close
together as possible while trying to connect. Make sure both the audio device
and Busker are unobstructed by walls, furniture, etc.
•
Press and hold the Pair button to reset the Bluetooth connection on Busker,
disconnect Busker from any other audio device, and restart the search process.
If this does not work right away, power off Busker and then power it back on.
•
Reset the Bluetooth connection on your audio device by turning Bluetooth off
and back on. You can find this under the Bluetooth menu in the Settings for
your phone or other audio device.
If this does not work, and you have connected to Busker before, find Busker in
the list of available or previously connected devices in your audio device's
Bluetooth menu, tap the "gear" or "i" icon located next to it and then select
Unpair or Forget. Turn Busker off and back on and try pairing again once it
reappears in your available devices list.
Note: If Busker has been paired to another audio device recently that is still
within range, you may need to repeat this process with that audio device to fully
disconnect.
If you are having issues connecting two speakers using Stereo-Link™:
•
Press and hold the Link button on the primary (Left) speaker for 10 seconds to
reset the Stereo-Link™ settings on both units. A confirmation tone will sound to
indicate that link settings have been erased.
•
Press and hold the Pair button to reset the Bluetooth connection on Busker,
disconnect Busker from any other audio device, and restart the search process.
If this does not work right away, power off Busker and then power it back on.
18