Gigabyte B650E AORUS ELITE X AX ICE User Manual page 21

6) CPU_OPT (CPU Fan/Water Cooling Pump Header)
The fan/pump header is 4-pin and possesses a foolproof insertion design. Most fan headers possess a
foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation
(the black connector wire is the ground wire). The speed control function requires the use of a fan with fan
speed control design.
CPU_OPT
• Be sure to connect fan cables to the fan headers to prevent your CPU and system from
overheating. Overheating may result in damage to the CPU or the system may hang.
• These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers.
7) ARGB_V2_1/ARGB_V2_2/ARGB_V2_3 (Addressable RGB Gen2 LED Strip Headers)
The headers can be used to connect a standard 5050 addressable RGB Gen2 LED strip, with maximum
power rating of 3A (5V) and maximum number of 256 LEDs.
ARGB_V2_1
ARGB_V2_3
Connect your addressable RGB Gen2 LED strip to the header. The power pin (marked with a triangle on the
plug) of the LED strip must be connected to Pin 1 of the addressable LED strip header. Incorrect connection
may lead to the damage of the LED strip.
For how to turn on/off the lights of the LED strip, please navigate to the "Unique Features" page
of GIGABYTE's website.
• To avoid abnormal LED behavior, do not connect addressable RGB Gen1 LED strips and
addressable RGB Gen2 LED strips to the same header at the same time.
• Before installing or removing the devices, be sure to turn off the devices and your computer.
Unplug the power cord from the power outlet to prevent damage to the devices.
ARGB_V2_2
ARGB_V2_2
1
ARGB_V2_1/
ARGB_V2_3
- 21 -
Pin No. Definition
1
1
2
3
4
Connector
Maximum Current
Maximum Power
Pin No. Definition
1
2
1
3
4
GND
Voltage Speed Control
Sense
PWM Speed Control
CPU_OPT
2A
24W
V (5V)
Data
No Pin
GND
Addressable RGB
Gen2 LED Strip
1