Lane Keeping Aid Apply steering
•
If the driver follows the prompt to start steer-
ing, the function is set in standby mode and
this message is shown:
Lane Keeping Aid Standby until
•
steering applied
The function will then be unavailable until the
driver starts to steer the car again.
Related information
Driving support systems (p. 276)
•
Activating or deactivating lane assistance
•
(p. 373)
Limitations of Lane assistance (p. 374)
•
Symbols and messages for lane assis-
•
tance (p. 375)
107
Lane Keeping Aid
108
Lane Keeping Aid
Activating or deactivating lane
assistance
The Lane Keeping Aid (LKA) function (LKA
is optional – the driver can choose to activate
or deactivate this function.
Activate or deactivate the
function using this button in
the centre display's function
view.
GREEN button indication – the function is
•
activated.
GREY button indication – the function is
•
deactivated.
Related information
Lane assistance (p. 371)
•
Selecting assistance option for lane assis-
•
tance (p. 373)
Limitations of Lane assistance (p. 374)
•
Selecting assistance option for
lane assistance
107
The driver can select how the Lane Keeping
)
108
Aid (LKA
) should react if the car leaves its
lane.
1.
Select
Settings
in the centre display's top view.
2. In the event of
Lane Keeping Aid Mode
select how the function should react:
Assist
– the driver is given steering
•
assistance without a warning.
Both
– the driver is given a warning
•
both from the steering wheel vibrating
and from steering assistance.
Warning
– the driver is only warned by
•
steering wheel vibration.
Related information
Lane assistance (p. 371)
•
DRIVER SUPPORT
My Car
IntelliSafe
,
373