Understanding Express Security Settings - Cisco Aironet 1140 Series Getting Started Manual

22/09/2019
Step 5 Click Apply.
Step 6 Return to the Summary Status page and click 802.11N
appears.
Step 7 Repeat Steps 3-5.
Step 8 Close your web browser.
Con guring Security Settings
After you assign basic settings to your access point, you must con gure security settings to
prevent unauthorized access to your network. Because it is a radio device, the access point can
communicate beyond the physical boundaries of your work site.
Just as you use the Express Setup page to assign basic settings, you can use the Express Security
page to create unique SSIDs and assign one of four security types to them. For detailed security
information, refer to the
Con guring Basic Security Settings
You can use the Express Security page to create unique SSIDs and assign one of four security
types to them. This illustration shows the Express Security page.

Understanding Express Security Settings

When the access point con guration is set to factory defaults, the rst SSID that you create by
using the Express Security page overwrites the default SSID, which has no security settings. The
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/1140/autonomous/getting_started/guide/ap1140aut_getstart.html
Getting Started Guide: Cisco Aironet 1140 Series Autonomous Access Point - Cisco
Cisco IOS Software Con guration Guide for Cisco Aironet Access
5GHz
. The 5-GHz radio status page
Points.
13/30