G-WEIKE G2 Manual
Hide thumbs Also See for G2:

Advertisement

G2
FIBER LASER MANUAL
* Notes: Adjust the height of the stand to ensure the focal length is 211mm/261mm (211mm for the 110-field lens and 261mm for the 150-field
lens). Each machine may have a slight deviation. Please refer to the red dot focusing measurement.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G2 and is the answer not in the manual?

Questions and answers

Roy Wurth
March 29, 2025

what is the rotary tools "Steps per rotation" for the servo to make a 360deg revolution

User image 67e85896471eb

Subscribe to Our Youtube Channel

Summary of Contents for G-WEIKE G2

  • Page 1 FIBER LASER MANUAL * Notes: Adjust the height of the stand to ensure the focal length is 211mm/261mm (211mm for the 110-field lens and 261mm for the 150-field lens). Each machine may have a slight deviation. Please refer to the red dot focusing measurement.
  • Page 2: Table Of Contents

    CATALOGUE 01. List Of Standard/optional Product Accessories 02. Buttons And Indicators Instructions 03. Installation Instructions 04. G2 PC Software Guidance 05. G2 Mobile Software Lite 06. Daily Cleaning & Maintenance 07. Product Specification 08. Usage Safety Guide 09. Precautions 10. Disclaimer 11.
  • Page 3: List Of Standard/Optional Product Accessories

    P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E / List Of Standard/Optional Product Accessories List Of Standard Product Accessories Main Engine Lifting Stand...
  • Page 4: Buttons And Indicators Instructions

    P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E / Buttons And Indicators Instructions Computer(PCsoftware) Field lens Laser source handle...
  • Page 5: Installation Instructions

    P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E / Installation Instructions Install the lifting stand Install and secure the main engine Focalizing...
  • Page 6 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Tips Lens Cover: Take It Off When Working Signal Wire: Plug In As Shown Laser Source Power And Laser Head Power: laser source power on, laser head power on (pulled out)
  • Page 7 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Product connection mode Connect the ports Connect the rotaries Connect DC power supply...
  • Page 8 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Engraving Bevel Engraving The fixing nut and angle adjusting nut can be loosened to adjust the main engine to a suitable angle.
  • Page 9 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Installation instructions for risers The G2 comes with 2 risers, which allows it to work on objects with higher heights, and you can adjust the height according to your processing needs.
  • Page 10: G2 Pc Software Guidance

    P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E G2 PC Software Guidance I .
  • Page 11 G2 PC Software Guidance I . Software Installation MacOS Download the G2 MacOS zip file from the website, and then unzip it to your computer Drag "Glaser" to the application Open the computer's Launchpad and check whether Glaser software is down-...
  • Page 12 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Open Security & Privacy in System Preferences and after unlocking, allow apps to be downloaded from anywhere Ⅱ...
  • Page 13 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Ⅲ . Main Interface After double clicking to run the software, the main interface style is as follows: Object list window Object Properties window...
  • Page 14 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Ⅳ . Picture Processing Settings Bitmap Import Click Draw Picture Files Select file type...
  • Page 15 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Ⅳ . Picture Processing Settings Bitmap Parameter Settings Select the picture.
  • Page 16 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Ⅳ . Picture Processing Settings Marking Settings * Red Light Preview and Marking Red(F1) : Mark the center point of the pattern to be marked, but do not emit laser...
  • Page 17 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Parameters: Used to set the parameters of the device. Enable continuous red light processing mode: After selecting this function, click “Red light indication”or press F1, the following dialog box will appear, and it will appear after...
  • Page 18 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E V . Vector Graphics Processing Settings Vector Graph Parameter Adjustment Select the Picture.
  • Page 19 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E V . Vector Graphics Processing Settings Marking Settings * Red Light Preview and Marking Red(F1) : Mark the center point of the pattern to be marked, but do not emit laser...
  • Page 20 This function is used for marking machines with red indicator light. Press F1 on the keyboard to execute this command. Mark(F2): Start processing. Press F2 on the keyboard to run this command. VII . Parameter Table G2 Setting parameter Material Speed(mm/s) Power(%)
  • Page 21 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E VIII . Rotary Axis Processing * First place the axis of rotation, then adjust the focal length according to the field lens(the 110-field mirror with a focal length of 211mm, 150-field mirror with a focal length of 261mm) then import the file,Set machining parameters, Select the file to be...
  • Page 22 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Select the movement axis on the system toolbar. Select split mark.
  • Page 23 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E VIII . Rotary Axis Processing Chuck Rotary Setting Figure (1) Figure (2)
  • Page 24 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Select the movement axis on the system toolbar. Select split mark.
  • Page 25 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E IX . Deep Engraving Tutorial Open the software,click on the vector file icon select the file, click open,and import the canvas.
  • Page 26 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E X . G2 color engraving instruction Color engraving template parameter:...
  • Page 27: G2 Mobile Software Lite

    P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E G2 Mobile Software Lite I .
  • Page 28 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E To set WiFi information, click Settings. Before configuring the network, you need to connect the WiFi of the device.
  • Page 29 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E Before configuring the network, you need to WiFi setting is successful, please connect to the connect the WiFi of the device.
  • Page 30 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E II . Homepage Settings Beginner's Guide/Mode Settings/Language/Device Information/User Agreement/FAQ/Engraving Parameter...
  • Page 31 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E III . Image engraving operation (import image/camera shooting) Crop Customize...
  • Page 32 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E III . Image engraving operation (import image/camera shooting) Edit Rotate the selected object...
  • Page 33 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E III . Image engraving operation (import image/camera shooting) Edit Text (can be stacked)
  • Page 34 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E IV . Search for device/device connection successful...
  • Page 35 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E V . Processing settings File name: Fill in the name (non-repeatable), which can be found in recent history files.
  • Page 36 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E V . Processing settings Depth The depth of engraving determines the speed of carving.
  • Page 37 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E VI . Processing Note Do not move your device! Do not process unattended! Do not lock the screen or put GLaser in the background,otherwise it may cause the device to be disconnected and cause abnormal processing!
  • Page 38 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E VII . Engraving completed Engraving time: The time it takes to engrave the image.
  • Page 39 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E VIII . Engraving Files Set up Rename/delete/cancel Details (optional document processing)
  • Page 40 P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E IX . Rotation axis mode Select the mode setting in Settings Plate: used to engrave flat objects.
  • Page 41: Daily Cleaning & Maintenance

    P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E / Daily Cleaning & Maintenance Clean It With Cotton Swab + Alcohol Wipe ( Note: The device can only be used after the alcohol has evaporated ) Cover The Lens With The Lid To Avoid Dust When Not Using...
  • Page 42: Usage Safety Guide

    P O R TA B L E B U T I N D U S T R I A L L A S E R M A R K I N G M AC H I N E / Usage Safety Guide Before installing the fiber laser, please check that the equipment is in good condition and the laser lens is clean and free of contamination.
  • Page 43: Warranty

    The processing quality is highly related to the user's operation, processing material, and processing environment, and is not covered by the warranty. / Copyright The copyright of this manual is the ownership right of the software and hardware involved in this product, all of which belong to Gweike Co., Ltd. G2 is a registered trademark of Gweike Technology Co., Ltd.

Table of Contents

Save PDF