Advertisement
15,
P ower Lines - An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power
lines or circuits. When installing an outside
antenna system, extreme care should be taken
to keep from touching such power lines or
circuits as contact with them might be fatal.
16. Overloading
- Do not overload wall outlets
and extension cords as this can result in a
risk of fire or electric shock.
17. Ob ects and Liquids
- Never push objects
o any kind into th s video unit through
openings as they may touch dangerous
voltage points or short out parts that could
result in a fire or electric shock, Never spill
liquid of any kind onto the video unit,
18, Servicing - Do not attempt to service this
video unit yourself as opening or removing
covers may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel,
19. Damage Requiring
Service-
Unplug this
video unit from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
a. When the power-supply
cord or plug is
damaged.
b. If any liquid has been spilled into, or
objects have fallen onto, the video unit.
c. If the video unit has been exposed to rain
or water,
d. If the video unit does not operate normally
by following the operating _nstructions,
Adjust only those controls that are covered
by the operating instructions, as an improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
video unit to its normal operation.
e. If the video unit has been dropped or the
cabinet has been damaged.
f. When the video unit exhibits a distinct
change in performance - this indicates a
need for service.
20. Replacement
Parts - When replacement
parts are required, be sure the service
technician
has used replacement
parts
specified by the manufacturer
or have the
same characteristics
as the original part,
Unauthorized
substitutions
may result in fire,
electric shock or other hazards,
21. Safety Cheek - Upon completion of any
service or repairs to this video unit. ask the
service technician to perform safety checks
to determine that the video unit is in safe
operating order.
USE
& LOCATION
• TO AVOID SHOCK
HAZARD ... Your Camcorder
and power supply should not be exposed to rain or moisture.
Do not connect the power supply or operate your Camcorder
if it gets wet. Your Camcorder
has been designed for
outdoor use, however it is not designed to sustain direct exposure
to water, rain, steet, snow, sand, dust, or a direct
splashing
from a pool or even a cup of coffee. This action could permanently damage the internal parts of your
Camcorder.
Do not attempt to disassemble
this unit. There are no user serviceable
parts inside. Unplug your
Camcorder
from the power supply before cleaning.
• DO NOT AIM YOUR CAMCORDER
AT THE SUN OR OTHER BRIGHT OBJECTS.
• DO NOT LEAVE THE CAMCORDER
WITH THE EVF AIMED DIRECTLY
AT THE SUN AS THIS MAY CAUSE
DAMAGE TO THE INTERNAL
PARTS OF THE EVF.
• DO NOT EXPOSE
YOUR CAMCORDER
TO EXTENDED
HIGH TEMPERATURE
... Such as, in direct sunlight,
inside a closed car, next to a heater, etc... This action could permanently
damage the internal parts of your
Camcorder.
• AVOID
SUDDEN CHANGES
IN TEMPERATURE
... If the unit is suddenly moved from a cold place to a warm
place, moisture may form on the tape and inside the unit.
• DO NOT LEAVE YOUR CAMCORDER
OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.
• STORAGE
OF YOUR CAMCORDER
... Store and handle your Camcorder
in a manner that will not subject it to
unnecessary
movement
(avoid shaking and striking). Your Camcorder
contains a sensitive pick÷up device which
could be damaged by improper handling or storage.
CARE
• TO CLEAN YOUR CAMGORDER
-.
Do not use strong or abrasive detergents
when cleaning your Camcorder
body.
• TO PROTECT
THE LENS -.
DO not touch the surface of the lens with your hand. Use a commercial
camcorder
lens soIution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.
• TO PROTECT
THE FINISH OF YOUR CAMCORDER
... Before handling your Camcorder,
make sure your hands
and face are free from any chemical
products,
such as suntan lotion, as it may damage
the finish.
5
Advertisement
