Advertisement
For recording in dim lighting.
NB,_ _
J
Note:
• Using Light reduces battery operating time.
• Provide proper ventilation when using
• Light extensively
in a hot environment.
Using Light when the Camcorder is
powered by a car battery may shorten
bulb life.
• Set Light to OFF when not in use.
I/CAUTION:
I
mark is indicated
that light
|
becomes
hot.
J
Never cover Light while on.
Before
you begin...
• Connect Camcorder
to power source.
• Set POWER to CAMERA.
•
PAOE 2/2 /
1
Press MENU for
_"_,6,_
MENU mode. Press
UPor_/.ou_:
Po.. °P,_. _ ,/
select_.L;._
=,%... _-_._,j
Press M.FOCUS to set OFF/ON or
OFF/ON/AUTO.
Press MENU to exit.
Press LIGHT repeatedly for Light ON,
AUTO, or OFF,
• In AUTO, light turns itself on/off
according to lighting conditions.
EVF or LCD Monitor
A:_
_D : Dght ts on.
A
_D : Light mode is auto.
J
12:_:_AM
LJJel
1
I ;l?r_ _T_ ii[111 ='I?I :]11i.
\
/
Before
you begin...
• Order Part No. VLLW0015 for replacement bulb.
• Set POWER to OFF.
Slightly raise portion O
of lens cover
to unhook, and slide portion
forward
to remove.
Using Tweezers or needle-nose pliers,
carefully remove bulb.
• Take unit to service center if you need
assistance.
Replace bulb using a clean cloth or
tissue.
(Do not touch
with fingers.)
Replace lens cover.
Note:
• Handle bulb gently. Excessive force may
cause bulb to crack.
DANGER:
se only replacement bulb (PART NO. VLLW0015) supplied by Panasonic to reduce risk
fire. Handle new bulb with cloth or tissue as skin oils will decrease bulb life.
emove lens cover and allow bulb to cool before replacing to avoid possible burn hazard.,
Advertisement
