Getting Started; Installing The Battery - Uniden WX100 Reference Manual

GETTING STARTED

Installing the Battery

Before using your WX100 for the first time, be sure to install a 9V Alkaline
battery (not included). It provides backup power when the AC power fails or is
temporarily disconnected. Typical backup power will last for up to 8 hours if
the radio is in standby and the batteries are fresh. If the radio is on and you
are listening to the broadcast, the backup power will only last for about
an hour.
1. Make sure the volume control is set to off.
2. Open the battery compartment cover
on the bottom of the WX100, and snap
the battery onto the battery terminals.
3. Put the battery into the compartment,
and replace the cover.
Replace the battery with a new one whenever "BATT LOW"
appears on the LCD with alert beeps.
Use only the type of battery specified, 9V Alkaline Battery
(6LR61).
6