Weather Channel Setting - Uniden WX100 Reference Manual

Weather Channel Setting

Your radio is preprogrammed with the seven NOAA weather broadcast
frequencies (Channel 1-7). Depending on your location, you may be able to
receive more than one channel with clear reception.
The first time you use your radio, Channel 1 (162.550 MHz) is automatically
set as your weather channel. Depending on your location, you may be able to
receive this channel.
To check or change channels, perform the following steps.
Turn volume/off control clockwise until it clicks. WX100 appears in
1.
the display.
2. Press weather.
3. Adjust the volume control to a comfortable listening level. You may hear the
weather broadcast on the initially selected channel. If not or if you wish to
select another channel, continue on. Otherwise stop here. Your channel
is set.
4. Press menu.
keys until CHANNEL appears.
5. Press /
6. Press select.
7. Press / key to scroll through the list of channels, or press the number
key to select the desired channel. The channel number and corresponding
frequency appear alternately in the display. If you receive more than one
channel, select the one that has the clearest audio.
8. Press select again to complete the entry.
During operation, when the channel information is flashing
on the display, you can change the channel using the
key. Then press select to complete the entry.
CH No.
1
2
3
4
5
6
7
Frequency (MHz)
162.550
162.400
162.475
162.425
162.450
162.500
162.525
/
12