Cleaning; Maintenance - Stihl iMOW 5.0 Operator's Manual

19 Cleaning

► Secure the pail or mortar bucket to the ground
with pegs.
Dismantling the docking station, charging cable
and power supply
To store the wall holder available as an acces‐
sory, or if covering is not possible, the docking
station, charging cable and power supply can
also be removed.
► Disconnect the power supply's mains plug
from the wall socket.
► Clean all components.
► Disconnect the charging cable from the dock‐
ing station and power supply and coil it.
► Remove power supply and coil up connecting
cable.
► Disconnect perimeter wire and guide wire from
the docking station.
► Grease wire ends to protect against corrosion
and weather conditions.
► Remove the docking station.
19 Cleaning
19.1 Cleaning the Robot Mower
WARNING
■ The cutting edges of the blades are sharp.
There is a risk of cutting oneself.
► Wear work gloves made of robust material.
► Stop the robot mower and activate the device
lock.
3
2
► Grip the robotic mower at the front grip sur‐
face (1) and the rear grip surface (2).
► Place the robot mower on its side and secure
it against falling over.
0458-011-0101-A
4
1
► Check the plug (3) of the diagnostic socket for
damage and tight fit.
► If the blade disk (4) is heavily soiled, remove
the blade disk (4).
► Remove the dirt with a wooden rod or a soft
brush. If necessary, use a ph-neutral deter‐
gent. STIHL recommends STIHL Multiclean.
► Rinse off loose dirt with a gentle water jet.
► Clean the underside of the robotic mower with
a damp cloth.
► Clean the charging contacts (5) with a damp
cloth.
► Clean the hood and control panel with a damp
cloth.
19.2 Cleaning the docking station,
power supply, charging cable
and plug connections
► Disconnect the power supply's mains plug
from the wall outlet.
► Clean the docking station, power supply and
charging cable with a damp cloth.
► If necessary, remove built-up dirt with a soft
brush.
► Clean plug connections with a dry lint-free
cloth.
► If necessary, remove built-up dirt with a
brush.

20 Maintenance

20.1 Visual Inspection
► Regularly check the robot mower:
– Cleanliness of the charging contacts
– Check the hood and protective strip for
damage
– Check that the wheels run smoothly
– Check the blades for damage, wear, cracks
and smooth running
English
5
39