Selecting The Frequencies To Scan; Scanning All Frequencies - Uniden BCT-10 Operating Manual

Operating Instructions

Selecting the Frequencies to Scan

Scanning All Frequencies

Note: The Alert feature is not active in this mode.
1. To scan all frequencies
(except Weather), press
S
the key repeatedly or
press and hold the
key until "XX" is blinking on
the LED display.
2. All frequencies, except weather channels, are scanned for an
active transmission.
3. When the BCT-10 finds an
active frequency it
activates a buit-in two
second delay before it
resumes scanning.
M
Note: The
20
S
key does not operate in XX mode.
MUTE
XX
HOLD
MUTE
XX
HOLD